Stop Police Terror

ESEE 4 vs. BK16: A comprehensive and detail comparison

Having a dependable knife around can be extremely handy from time to time. Yet to obtain a suitable product for your use is not exactly easy, especially when there are many models on the market. You may run into trouble making a right decision because you have little knowledge in the field.  In that case, this article can introduce you to two excellent knifes: ESEE 4 and BK16. You can find additional information about them right here in this article. Check them out and see if one of these knifes can catch your attention.

Randall’s Adventure Training and KA-BAR and well known names in the knife industry with a lot of loyal customers.  Stay true to the manufacturer reputation, knifes which come from these lines are high quality and reliable. ESEE 4 vs. BK16, now this is quite a tough match but as long as you know their characteristics clearly, it’s not hard to decide. Down below are features and specification of the knife, take a look at them and consider their usefulness to your needs. To ensure your investment is well-spent money, you must come up with the one that satisfies you the most.

Sizes and dimension

Randall’s Adventure Training ESEE 4

  • The overall length: 9 Inches
  • The blade length: 4.5 Inches
  • The blade width: 25 Inches
  • The knife weight: 0.5 Pounds
  • Material: 1095 (Carbon Model) 440C( Stainless Model)


  • The overall length: 9.25 Inches
  • The blade length: 4.375 Inches
  • The blade width: 25 Inches
  • The knife weight: 0.4 Pounds
  • Material: 1095

From the first look, you may already see that the BK16 has a more noticeable profile compare to the ESEE 4. However, BK16 is actually the lighter one of the two even if its blade and overall length are longer. For the material, BK16 utilize 1095 which is a high carbon steel. It strengthens the blade and enhances its toughness but more or less vulnerable to stain and rust. On the other hand, ESEE 4 employs 1095 and 440C in its models. 440C is a high chromium steel which is good combating general corrosion and alike. Its toughness is adequate though not as good as the 1095

Handles constructions

When it comes to ergonomic, ESEE knife design is pretty famous and ESEE 4 is not an exception. The handle of ESEE 4 looks just like its ESEE 3 predecessor with a minor difference in the thickness. It has been well tested and is effective as a stable holding for your hand. Thanks to the presence of linen Micarta scales, you could have a tight grip on the handle even if it’s sweaty or wet. Its spine jimping offer increased control when you need to make thump supported cuts. The large choil can be used as extra finger groove if needed.

The handle of the BK16 appear to be a bit thin and small to some people but it works perfectly fine. Unless you have hand happen to be kind of large, you can hold the handle comfortably. The Ultramid material doesn’t feel nice overall but it should be good enough for the job. Micarta scales can also be found here which perform the same as the above. It did add weight to the handle though and as a result, the knife balance point shifts backward a bit. While the scales permit a tight grip, they could end up as potential hot spots in heavy uses condition.


For the blade, ESEE 4 employs a flat ground, drop point style which is easy to control and manipulate. You can achieve desired result results with only a moderate amount of force required. Skinning and batoning are easy to perform with this blade due to its thick flat spine and the drop pint. It’s not good piercing tasks but everything got to have pros and cons at the same time. There are two types of steels ESEE 4 use in its models. The powder coated 1095 is tough but tend to rust and stain if you don’t take care of it properly. The 440C model won’t have this issue and much easier to slice but the toughness is lower than 1095.

When you want a versatile knife, you will definitely like the BK16 blade. No matter what kind of tasks you intend to use the knife in, its blade can handle everything admirably. The length of the straight edge is sufficient for carving purpose while the belly works great for hunting needs. You can cut through rope and tough material like it with little trouble. But if you want to make thin slices, it could be a bit tricky because of the blade thickness and its coating. General performance of the knife remains fairly decent though.


Come with the ESEE 4 is its molded sheath that can keep the knifes safe and secure. For attachment, there is a clip plate you can mount on either side of the sheath.  In hot and humid environments, the plastic holds together rather well so you can carry the knife around conveniently. If you like to tie the sheath to belt or pack instead of clipping it, there are eyelets you can use. Cord and cord lock are provided with the knife as well so take advantage of them.

BK16 doesn’t have a fancy sheath but it’s quite versatile nerveless. To attach it, there is a Velcro – Snap belt loop along with MOLLE loops on its back. The sheath can be taken off without requiring the removal of your belt which is a major plus. To contain the knife, the top is secured by a dual snap mechanism that keeps the knife safely inside the sheath. On the outside is a small compartment for pocket-size tools such as a sharpener.


And that would be pretty much everything you should know about these knifes, not hard to understand, right? To determine the winner in a competition between ESEE 4 vs. BK16, you need to take into account your own preferences and personal requirements. If you know what you want then the only thing left to do is compare it to the knife characteristics and make your purchase accordingly.

Esee 5 and Ka-Bar Becker BK2 – Which One Should You Prefer?

Esee 5 and BK2 have its good points and some drawbacks behind. This is the main reason you have no idea which one you should select for your hunting purpose or anything else. These are folding knives that I/We are going to help you identify the similar points and the differences between them. Keep on reading my/our post!

A general comparison between ESEE 5 and BK2

Factors ESEE 5 Ka-Bar Becker BK2
Dimensions Overall length: 11 inches

Blade length: 5.25 inches

Thickness length: 25 inches

Blade Width: 1.56 inches

Weight: 16 ounces

Overall length: 3.4 x 13.7 x 2.5 inches (10-5/8 inches)

Blade length: 25 inches

Weight: 1 pounds

Materials Steel: 1095 Carbon, 55-57 Rc

Finish: Textured Powder Coat
Grind: Saber

Handle: Canvas Micarta

Thumb on spine: Glass Breaker Pommel


Steel (on the blade): 1095 Cro-Van steel

Handle: Grivory

Finish: Glass-filled nylon

About the Esee 5

The Esee 5 was made by both Jeff Randall and Mike Perrin – two handmade knife makers since 1997. They established an outdoor training agency offering global training, weapons, and logistical solutions to other military agencies in the remote world.

Unlike any knife producer, ESEE does not need to release new kinds of knife because they always check its new original before launching on the market. Then, they get the final model and the product is determined by the production based on real feedback. Thereafter, the completed knife is checked again and releasing to the shops or other markets.

When you purchase a knife, you do not have to concern that you are getting a high-quality knife which is designed by gurus. Also, it works well for most hunters and other users in every survival situation.

This knife has 11 inches in general with a great drop point on the blade shape measuring 51/4 inches in length. It is built 1095 high carbon steel with a high and flat ground as well. The finish of the knife is made from the olive green powder and a black coated as well. Both colors are suitable with the serrated and non-serrated edges.

Furthermore, it has a tremendous full-tang, comfortable in use, clutch shape and handles flagstones made from Rucarta and the glass breaker on the end. The knife also features a Kydex sheath.

Many users agree that the ESEE 5 has a beautiful design and functional at all. The Drop Point is more suitable than the Clip Point so that it is the perfect knife for outdoor activities with a stronger point.

Nonetheless, in my/our opinion, the knife should have an extra flash when making as it also creates an ideal knife for survival purpose.

For example, the Drop Point in the blade shape supports different tasks for users because the tip of the blade is appropriate in the way of playing a game. So, you enable to see what you are doing accurately. In other words, you completely control the knife when using it as this is a truly important when you want to keep the hides for later usage.

The serrations with the spine of the blade are useful and these offer a non-slip ground for supporting your thumb when utilizing extra pressure to the blade to make difficult cuts as well.

Furthermore, the Ricasso supports the straight, long and the section of the edge to increase all the side of the single quillion by the Micarta clasp which allows you to adjust the maximum amount of grip when carving.

The long and the straight parts of the edge are long enough to be sited on a slicing tool and it also has a beautiful angle near the tip for smoothing game.

How about the handle? Well, it is nearly perfect that you may surprise a little bit. The Rucarta is excellent and a great choice that offers high-quality gripping surface.

Moreover, it is impermeable to cold, heat, corrosion, influence, and chemicals as well. Hence, the handle slabs will be endurable for a while of using because the blade is sharpened and is longer.

And…what about the Ka-Bar Becker BK2?

The Ka-Bar Becker BK2 has the overall length of 10-5/8 inches and a 5-1/4 inches in the blade. It weighs about 16 ounces. This knife is a thick knife but it is not a bulky knife so that you can carry it on your hunting journey or for using survival purpose and a campsite as well.

The blade is a.25 inches (about 6.35mm) thick slab and it is also made of 1095 high carbon steel.

The blade of the BK2 is a traditional drop point in the shape with a strong tip and a high-flat size. The power-coating is sturdy and heavy like the ESEE blades. This coating will offer some rolling protection when trying to trim things deeply.

The handle is made from the Zytel which is high-quality plastic with full steel tang. It is a standard handle design and it is ideal for a workhorse knife or something like hunting knives as well.

Also, the BK2 does not have any sharp edge so that you can hold the finish for many hours without much hassle.

The outside factor is also incredible to make the BK2 is nearly perfect at all. The sheath is tailored the simple plastic and nylon at once so that it is truly lightweight and strong.

Moreover, the coated has wonderful retention with a strong snapping sound when you push the knife in the right place.

The knife does not have any blade rattle, but it still has a drain hole. With the belt loop, it is simple inbuilt the nylons with a snap fastener for improving retention. This is a full of removed element with the Phillips head driver and the plastic sheath comes together.

Thanks to the rivet holes and slots, you have many choices for enhancing locks, Tek-Lok, (Parachute cord) Paracord, and webbing as well.


It is a daunting task to choose from the ESEE 5 and BK2 for the first place, but when you identify their features and all factors about these, it is an easy selection. Do not forget to do your homework about listing all points which are related to them before making your final purchase.

8cr13MOV and AUS-8 – What Do You Need to Know About These?

There is no doubt that most of the hunting knives are made from steel materials. However, the steel materials also have several different types that you may not know.

As a hunter, you should know more details about these to have a better choice. Even some people have no idea about the difference between the 8cr13MOV and AUS-8.  For this reason, you need to keep on reading our review. Stay tuned!

Heat resistance

There are many steel types available on the market, but you should have a solid understanding of this steel material; especially how they react to the heated condition.

Exotic steel with a low heat resistance will not keep well and the price point is also not expensive.

Some popular types of steel

Tool steel

Tool steel is hard steel used in cutting other tools. You will recognize some common steels in this group such as D2, O1, Crucible’s CPM series, etc. Some also are higher speed steels like M4.

Carbon steel

Carbon steel is made for rough usage when durability and toughness factor is crucial. You can see this material with some survival knives and machetes. Producers often make a sharp edge and this point is easy to sharpen again.

1095 is the most common carbon steel that you enable to see in every hunting knife.

Stainless steel

Stainless steel is a combination of carbon steel and chromium to combat corrosion and other properties.

These will boost performance levels and the expense of quality firmness will be stable. To get high-quality of the stainless steel in each hunting knife, this must have 13% chromium or more.

You will see stainless steel in some common hunting knives such as EDC knives, some series of steels (400, 154CM, AUS, VG, CTS, MOV, Sandvik and Crucible SxxV).

Some latest kinds of steels

420HC Steel

The 420HC is an old type of steel which added more carbon to the recipe of 420. (HC is high carbon material).

It is low carbon content, so it is soft and it has a low number of carbides. Although it is quite soft, the additional micro-crystals in the steel offer the firmness to make a steady and sharp edge.

Though the 420HC cannot keep an edge quite well, this is a really tough, low-cost steel, and stain resistant material for a good hunting knife.

AUS-8 Steel

The AUS-8 is one of the most popular stainless steel for every object; especially for hunting knives that producers need to use from countries around the world.

It is hard, solid, and stain resistant enough to withstand any kind of condition and protect the main things.

Although it could not hang long with stylish metal steels, you still find a right choice for your hunting knife.

8Cr13MoV Steel

The 8Cr13MoV is the main material for all Chinese produced steels and you may find this material in the latest knives of Chinese. They have total 9th series and it is said that 9Cr is the highest quality material of these series even these are better than AUS-8.

In fact, the 8Cr is not better than the AUS-8 because it is not solid enough and it is quite cheap. Well, have you identified the difference between 8CrMOV and AUS-8? I am pretty sure you have gotten these!

7Cr and less are not rated the top-notch materials, so you can do not mind these types of saving your bucks and time.

1095 Steel

1095 is also an old high carbon material which is tough. People found this on a large number of conventional style folders, but it is a daunting task to get these in the heat.

Luckily, I found it without much hassle. However, it made some bad dings on the edge when I need to improve it to a higher level on a thin blade.

1095 do not cost too many bucks, so the price of a hunting knife in this material is also affordable. And you will have a better edge with the thickness blade.


For me, I do not think those materials and types of hunting knives are difficult to have a deep understanding. When you see 8Cr13MOV and AUS-8, you completely find out their different points at all.

Hope that you will find the right knife for the upcoming hunting season once you have recognized its materials. Feel free to share with me about your hunting experience and how to select a suitable hunting knife from your situation.