Stop Police Terror

How To Join A PMC Without Military Experience!

Considering the nature of PMC (Private Military Company), it’s evident that people with military backgrounds have distinct advantages when it comes to employment prospect. Because of the hazardous working conditions and the demands for skilled personnel, ex-military specialist and discharged soldiers are highly sought-after by most PMCs. That being said, PMCs could also hire additional employees to take care of a variety of needs on the field. Some of these positions require no military experience and open for everyone that is interested.

Intend to join a PMC but feel that you might not have the experience that most employers tend to demand? If that happens to be the case then this article could provide you with some essential insights about the occupation.  Down below, you would be provided with a step by step guide on how to join private military jobs no experience including application and training. Additionally, to debunk common misconceptions, a couple of facts about PMCs are also elaborated so you know exactly what you are getting yourself into here.

Joining A Private Military Company: What You Need To Know

Make no mistake; you must already have some abilities to have a chance to work as a military/security contractor.  Excluding military experience, the majority of PMCs in business prioritize people that have specific qualifications in electronic communication, psychology, mechanical … Depend on the position, the criteria vary from case to case but you likely have to present your degrees in specific fields to secure employment.  As military experience is needed in all direct contact roles, PMCs often employ people that lack it in support echelons. Here are a couple of posts that ordinary civilians could apply for in a PMC

  • Surveillance experts
  • Transport specialists
  • Background investigators
  • Maintenance technicians
  • Security monitors

To put it plainly, if you want to join a PMC without any military experience whatsoever, make sure that you excel at a particular skill. Be it listening, observation or reasoning, as long as you are exceptionally good at something then your odd is acceptable. Similar to ordinary businesses, PMCs around the globe would never hire someone that is unable to offer anything besides the desire to work for them. Therefore, the first thing to do is to decide whether or not you got what it takes to persuade recruiters from PMCs to pick you. If you have none currently then take up a course that gives you the skill.

Quick Reminder: In most of the case, PMCs only employ people with no military experience in positions that rarely have to face dangers at work.  While some companies provide familiarization sessions in weapon handling to all employees, it’s highly unlikely that they give you actual weapons on the field. So a PMC operator that specializes in setting up Internet/telephone lines might find himself/herself being shot at without the ability to return fire. Of course, the possibility of that scenario taking place is low as you often work along with full-fledged, armed-personnel but the risk remains.

Searching And Applying For Positions

In the age of technology age, PMCs tend to post recruitment notifications on their website and that is the best place for you to start. Once you come across a position you like, see if you could satisfy all requirements put forward by the PMCs. Assuming that you have the right set of skills for the job, the next thing to do is to create a résumé that outlines your qualifications, accomplishments and alike. Don’t forget to include previous working experience that might be an asset in the post you are applying for. As always, it’s essential to ensure that everything you state in your résumé is verifiable by potential employers.

After you manage to come up with a presentable résumé, it’s time to submit it to the PMCs. Choose several different companies that have the position you want and send in your application in order to increase the chance of landing a job. Some PMCs let you upload your résumé and submit it directly while others ask you to fill an online form before attaching your application. For most of the time, you should be able to see instructions in the category with a name like “Careers”, “Employment Opportunities” and so on. Just follow them and you would have no trouble informing the company recruiter that you are interested in the post.

Now you have to wait for the PMCs to reply and with a wee bit of luck, you might start working for a PMC soon. Take the chance to gain experience, hone your skill and you could start going after higher positions in the future.

Salary And Benefits Of The Average Security/Military Contractors: Overviews

It goes without saying that PMC operators often have to deal with stressful situations and less than ideal working conditions. Hence, the usual salary of a security/military contractor is much higher than regular occupations. Generally speaking, the daily wage of a PMC employee varies between $500 and $1,500 but skilled personnel could receive up to $15,000/week. Experience, expertise and possible risks in the immediate surrounding decide the paycheck you get at the end of the day. It’s safe to say to that the outstanding salary is the main reason why so many people want to work as security/military contractors

With the salary settle, now let’s take about the benefits that a PMC operator could access on the field. To put it plainly, even the best PMCs could not offer you the benefits that are as good as militaries. For instances, if you sustain serious injuries while working, extraction might not be available immediately. In contrast with active duty soldiers, PMC operators don’t receive protection from international laws such as the Geneva Convention.  In the case you violate the law of the country you are working at and somehow end up captured, there would likely be serious consequences. Always keep these issues in mind while applying for PMCs.

5 Famous Names In The Industry

At this point, you should know what needs to be done in order to join PMCs with zero military experience. So here are a couple of companies that you could consider sending in your application.

  • Academi

Founded back in 1997 by an ex-Navy SEAL officer named Erik Prince, Academi (formerly Blackwater) offer security services to various governments on a contractual basis. Initially made to provide military and law enforcement organizations with training supports, Academi expanded and now it’s a premier company in the PMC business. Operators of the company were seen in multiple hot spots in the world such as Afghanistan, Bosnia, Iraq, Israel, Yemen, … Academi is also the owner of the largest privately-held training center in the US.

Throughout its history, Academi runs into a lot of incidents from “unjustifiable discharges” to “manslaughter.”

  • Aegis Defence Services

A UK-based company, Aegis Defence Services is a well-known PMC with offices in Afghanistan, Saudi Arabia, Somalia, UAE,… The company was brought into existence in 2002 by Tim Spicer, a former CEO of Sandline International which is also active in the military/security industry. Back in 2011, after the US announced that it’s going to pull its military out of Baghdad, Aegis Defence Services is one of the PMCs that take over security operations.  From 2011 onwards, the company broadens its recruitment and start hiring staff from several African countries. In October 2015, Aegis Defence Services was taken over by GardaWorld.

  • DynCorp

First started as an aviation company, DynCorp now offers security services to many countries like Bolivia, Angola, Haiti, Kuwait, Kosovo,… The protection of Hamid Karzai, the President of Afghanistan from 2001 to 2014, is provided by DynCorp International during the interim period. In addition to that, the fledgling police forces of Iraq and Afghanistan receive much-needed training from DynCorp as well. The company also received a lot of contracts to maintain vehicle and establish supports for military camps around the globe.  Since the 1990s, DynCorp is involved in planning contingency operations.

  • Erinys International

Headquartered in Dubai (UAE), Erinys International is a British PMC that primarily deals with the security of personnel and assess. Erinys International has subsidiaries and associated companies in the UK, Republic of Congo, Democratic Republic of Congo, South Africa, Iraq…  The word “Erinys” in the name of the company refers to the avenging deities in Greek religion that stand at the entrance of the Underworld. In 2003, the company landed a contract involves recruiting and training an Oil Protection Force (OPF) for Iraq Ministry Of Oil. The agreement ended in 2004 with around 16,000 Iraqi personnel guarding 282 locations.

  • Triple Canopy, Inc

Founded in 2003 by U.S. Army Special Forces veterans, Triple Canopy, Inc offers security, mission support and risk management services to governments, corporations, nonprofit clients,… Key members of the company choose the name “Triple Canopy” as a way to remember the layered canopies in the jungles whether they receive training. In the aftermath of the invasion of Iraq, Triple Canopy is known for guarding headquarters and associated facilities of Coalition Provisional Authority throughout the country.

Frequently Asked Question About PMCs

  • Is working for PMCs illegal?

Introduced back in 2001, the United Nations Mercenary Convention explicitly forbids the recruitment, training, use, and financing of mercenaries and it has been ratified by 35 states. As many actions of PMC operators resemble activities carried out by mercenaries, it’s slightly tricky to tell them apart. Some people claim that the United Nations Mercenary Convention only cover mercenaries in post-colonial Africa and it fails to address the issue of PMCs. In any case, to make a living as a PMC operator means low levels of legal protection compared to soldiers.    

  • How does it feel to be an operator in PMCs?

By all accounts, a normal PMC operator tends to receive far lower attention than active members of the armed forces. If you are serving in militaries, you always have an army to support and relieve you in times of need. On the other hand, if you are working for PMCs, such assistance are not available. That is why companies in the industry prefer to hire former soldiers than untested civilians. Thanks to their accumulated experience, most veterans at least know what to do and how to react in stressful situations. Therefore, if you expect a high level of comfort while working as PMC operator, you are up for a surprise.

  • Should I make my résumé more appealing by taking training courses and gain certificates?

Well, there is no such thing as training standards in the PMC industry and so showing some papers is unlikely to increase your employment prospect. Unless the certificates you get come from high tier security companies, they are not going to work in your favor. That being said, if you want to take training courses, take them from the company that also offer work opportunities. Specific PMCs recruit from their training programs and that means if you got lucky, you might be able to impress someone enough to hire you. Besides that, don’t bother joining in programs that offer marginal improvements to your skill.  

Important Note:

The above should cover anything you need to know about how to get in a PMC without having military experience. Nonetheless, if you wish to enhance your odd, it’s recommended that you consider joining the military for some time (Army, Navy and Air Force). You don’t necessarily have to be a Tier 1 soldier, simply try to learn your way around so you could put in your résumé. During the application process, you might have to compete with people that have similar skills to you and military experience would be the decisive factor.

In addition to the military, you could sign up in other government services to get licenses such as Security Clearance. Some PMCs hire applicants just because they have the right licenses in their résumé. Because of that, spending a few years in the police, military and so on is going to increase your chance of getting the desired post.

How To Heat A Chicken Coop Without Electricity In Winters

Although chickens are indeed resilient birds and certain breeds should endure cold rather well, temperature drops might produce some problems. Generally speaking, chilly weathers would interfere with the egg production and a couple members of the flock could fall sick. Many people rely on heating appliances such as heater and heat lamps to keep their coop sufficiently heated in winter. That being said, these appliances require a constant supply of electricity to work and fire is an ever-present threat. Therefore, farmers have been searching for a way to heat a chicken coop without electricity once the weather gets cold.

You are a beginner at raising chickens and don’t know how to provide your chicken flock with enough heat? If that happens to be the case then you have come to the right place. In this article, you would be introduced to some of the best methods to protect your chicken from extreme cold without using electric powered devices. From the principle straight to the execution, you could find pretty much everything you need to know right down below. Take a good look at the provided information and you would be able to keep the chicken flock reasonably warmed in wintertime with relative ease.    

Top 8 Non-Electric Methods To Keep Your Chicken Coop Heated

  • 1/ Make Use Of The Sun  

While daytime is shorter than usual in winter, you could nonetheless take advantage of sunlight to deli liver much needed heat to the chicken coop. Large-sized, well-insulated windows should serve well as sun traps since they allow incoming sunlight to effortlessly reach the floor the of the coop. In order for you to get the most out of the sunlight, the coop floor should be made of materials like stone, concrete or compost. The materials act as thermal masses that accumulate heat during the day and then steadily release it throughout the night.

  • 2/ Take Care Of Air Leaks

It goes without saying that air leaks would accelerate the heat loss rate and that is why you need to seal all gaps and cracks. In the case the chicken coop you are using is relatively new, you should find few leaks across the surfaces. On the other hand, if the coop is fairly old, certain parts may already rot and you have to repair them as soon as possible. If you don’t have the patience to assess your well-used coop, it’s a good idea to replace it with a new one.

  • 3/ Keep The Air Well Circulated

Despite the fact that you have to protect the coop from cold air, it’s essential that you don’t limit the airflow too much. Once the air gets stagnant, the chickens would be vulnerable to ammonia build-up so be careful and act appropriately. For most of the time, it’s strongly advised that you outfit the chicken coop with an efficient ventilation system to keep the air moving. By doing that, the level of humidity in the coop should stabilize at an acceptable level and prevent the growth of mold in the bedding.

  • 4/ Preserve The Chicken Coop Hygiene


Needless to say, it’s of utmost importance that you keep up the hygiene of the coop if you want the chicken to stay healthy. In case you don’t know, these birds release a lot of moisture through their breathing and poop which increase the humidity of the surrounding. Without timely cleaning and tidying, the interior of the coop would get humid and frostbite could even become a fairly annoying issue as a result. In most of the case, you need to check up on the chicken coop periodically and see if you have to clean it or not.  

  • 5/ Use The Deep Litter Technique

Don’t have the time to thoroughly clean the chicken coop? Then you should try out the Deep Litter technique. All you have to do is to spread pine shavings and other organic matters over the floor of the coop. Every once in a while, visit the coop and use a rave to stir the bedding before adding another layer of pine shaving on top.  The shaving would take care of harmful bacteria in the chicken poops and it helps to insulate the coop too.

  • 6/ Set Up Some Roosting Bars

Chickens often seek high grounds to sleep at night so you should construct a couple of roosting bars if you coop don’t have any. The flock normally roosts together and tends to flock their feather in the process which keeps them warm in cold weathers. As standard roosting bars must be set up above ground for at least two meters, the chickens would not come into contact with cold surfaces. Take the number of chicken you currently have into account in order to create enough space on the roosting bars.  

  • 7/ Build A Sunroom For Chicken

In cold weathers, chickens prefer to hunker down inside the coop and a lot of people are also tempted to keep their birds locked up.  Nonetheless, it’s much better for the chickens to be able to move freely so you should consider adding a sunroom extension to your coop. It’s quite simple to build a sunroom and it only requires easy to find materials such as clear plastics, some poles and so on. The sunroom would shield the chickens from incoming cold winds but still let the birds get around without much problem.

  • 8/ Adjust And Improve The Diet   

Cooked pumpkin, cracked corns and similar foods would be excellent additions to the normal feed of your chicken in winter.  It often takes a whole night for the flock to digest certain foods that they eat in the evening which naturally keep their body warm. Besides the foods, you should also make sure that every chicken of the flock has access to fresh liquid water. Once the temperature drops below freezing, the water dish of the chicken coop often freezes over which is not good. You could put a saltwater bottle in the dish to keep the water from freezing or bring water to the coop when you collect eggs.

Taking the 7.62x54r and 30-06 on Your List

When you take time to looking for a cartridge, you absolutely see hundreds of products in the shop as well as on the online shopping website. Then, you pick 7.62x54r and 30-06 but you have no idea which one is better. Fortunately, you enter to the right place as my article as well as my website will provide lots of useful information. Stay tuned!

An overview of the 7.62x54r

I know that you want to dig into the difference between the 7.62x54r and 30-06 right away, but you should take these 2 cartridges into 2 separated groups. Then, you enable to get a clear picture.

In 1882, the Russian administration established a commission to figure out the practicability of modifying the Berdan single-shot rifle to rehearsing magazine feed.

Between 1883 and 1885, diverse designs were launched when the most favorable models were continued by Sergei Mosin from Tula State Arsenal. Unfortunately, without getting a solid commission, it suddenly fell.

In 1886, France had adopted the first smokeless around the world by the other military of the cartridge powered. In 1889, the Russian military set up a new commission from the direction of the main general N.I Chagin, they wanted to change the way to use the Berdan rifle.

Then, the successful models of Mauser, Mannlicher, Lee, and Lebel were checked. Nonetheless, the most benefits to the Russian military were a 7.92mm (.311”) caliber rifle invented by Sergei Mosin and an 8.89mm (.350”) caliber rifle generated by Belgian firearms with designers are Emile and Leon Nagant.

At first, the Nagant rifle demonstrated the most successful model. The Mosin was solid and having low-quality materials. Nonetheless, a Lieutenant General P.L Chebysher yielded a written report showing that the Mosin model should be chosen because of its Russian invention. The Mosin designs were carefully tested with reducing the complexities of the Nagant.

Along with the Nagant rifles and the Mosin designs, the 7.62x54R was created with a 210gr nose shaped offering 2200fps from the 31.5 inches M91 barrel. With Germany’s selection of a light velocity bullet for their 8x57JS military cartridge in 1905, Russia then made a 148gr pointed bullet from the 31.5 inches barrel to 2800fps. This is the first time of the 7.62x54R’s was invented.

The 7.62x54R is identical to the .284 Winchester with a short and large case. This model is similar to new short cartridges in these days. Possible power is comparable to the .308 Winchester and the .30-06 Springfield relying on barrel lengths. The 7.62x54R is strongly effective on a medium use.

In general, the ammunition factory has about 180-grain bullets which attain 2450fps in 20 inches barreled carbines and it likely increases up to 2550fps in 24” barrels (SVD) and around 27 inches barreled rifles. It features the same points of the .308 Winchester.

From hand loads, 150-grain bullets could be driven more than 2000fps in carbines and over 2900fps in long barreled rifles. Moreover, the 180-grain bullets could be controlled at 2550fps in 20 inches barreled carbines with nearly 2700fps in long barreled rifles.

What about the 30-06?

The 30-06 was one of the most common in the 1950s. Until now, it is also a hot product with every hunter. It could be still prominent in the upcoming time. The 30-06 was known as U.S. Cartridge and a Model since 1903.

The 30-06 was loaded with the 220-grain bullet and the entire package was made for the Springfield Model 1903 rifle.

The origin cartridge was pretty great until the Imperial German Army found an 8mm (.323) round which was lighter and faster in 1905. Then, the US Army adjusted the 03 with the 150-grain bullet and renamed it again – the US Cartridge, Model of 1906. Most people called it the 30-06.

The Army gained a suitable balance between recoil and power in a cartridge. Today, it has totally the best product and wins any type of large game in North America. Everyone can use it easily.

Furthermore, the 06 enables to control a bigger range of bullet weights than other cartridges. You ought to use the 110-grain bullet or the 220-grain ones depending on your choice and the hunting range. It is so great to select several bullet weights, the 06 users often may make their own list before like a student read and summarize their lessons at home.

Your rifles could be more flexible in the 30-06 as the performance can increase from 22 to 24 inches barrels. The bigger magnums need to get heavier and longer barrels around 28 inches. When you see the lighter recoil level of the 06, you will know that you probably bring the lighter weight rifles on difficult hunts which are related to going hiking and climbing.

  •    125 grain and 130 grain: these are available for varmints, but the 06 is a bit bulky for advanced shooting.
  •    150 grain: most deer hunters love it as it is quick and they can expand their rifle shooting range to improve their performance in their track.
  •    165 grain: some experienced shooters indicate that this is also suitable to shoot the right targets easily.
  •    180 grain: this still helps you to take the proper goal, but you are harder to control your rifle as it is bit heavy.
  •    200 grain: when should you use this? If you are proud of your hunting and shooting skills, you will want to invest in this bullet. Or you need to catch a big animal, this is your best option in this case.

The 7.62x54r and 30-06 – which is better?

In fact, the 7.62x54r and 30-06 have huge experienced history from previous users and the quality still maintains in these days. If you want to save a lot of bucks, the 30-06 is your option. Or if you cannot carry a heavier rifle in long roads, the 30-06 is also your choice. It is greatest when you have enough money to take both products and enjoy its qualities at the same time.

4 Magnum vs 30-30 – Consider Good Cartridges?

Are you looking for a good cartridge for your gun before participating in a deer hunting season? Or are you considering the 44 Magnum and 30-30? You do not have any idea about these and you think that it is a daunting task to overcome! Hold on…you should not rush to make your final decision because you often have another opportunity. In other words, you ought to ask other experienced hunters or viewing my article right now!

Some cartridges that you should know in advance

Because there are several deer cartridges on the market, you should divide these into 5 certain ones. When you have a clear picture, you will identify the 44 Magnum and 30-30.

Short deer cartridges

These cartridges have magnum revolver ones in order to use in rifles, conventional woods, and other country cartridges.

Most are limited to their rainbow trajectory or killing power to increase ranges from 50 to 150 yards. For instance, you enable to hunt Columbian black-tailed deer in a deep forest like Pacific Northwest.

Additionally, you ought to shoot whitetail deer in the Northern, Southern, and Eastern. Add these cartridges on your list such as the .25-35, .357 Magnum, .35 Remington, 38-55, .41 Magnum, .44-40 High Velocity, .44 Magnum, and the .45-70.

Varmint cartridges

These calibers are made for the long shooting of varmints, deer, and other small predators. Typically, they are at the lower end of the killing power scale like other modern deer cartridges. They are much more powerful than other short cartridges between 150 yards.

Most hunters may shoot these more precisely than other deer cartridges which kick harder. This is a great advantage that you should not miss out. They are also generally helpful for hunting the smaller predators in the open country like Coues deer, little Texas whitetail deer. The .243 Winchester, the 6mm Remington, the.250 Savage, the.257 Roberts is tremendous cartridges.

Medium range cartridges

These have MPBR with up to 200 yards. The hotter has both 6.5mm and the 7mm numbers in the 285 yards.

These are suitable for hunting all sorts of North American deer through their energy and route limits. Medium range cartridges have the .260 Remington, 6.5×55 SE, 6.8mm SPC, 7-30 Waters, 7mm-08, 7×57, .30-30, .300 Savage, .30-40, .307 Winchester, .308 Marlin Express, .303 British, .32 Winchester Special and 8×57 Mauser.

Long range cartridges

The power and the MPBR can get more than 300 yards to shoot deer. They are considered to reach western mule deer and the Coues whitetails in the southwestern mountains.

Nonetheless, for those who have long range rifles can use these cartridges for hunting some special situation such as the Southern bean fields, Mid-western wheat fields, South Texas Senderos.

Go with these cartridges for your gun like the 6×62 Freres, the.240 Weatherby, .25-06, .257 Weatherby Mag., 6.5mm-284, 6.5mm Rem. Mag., 6.5x68S, .270 Winchester, 7×64 Brenneke and .280 Remington.

All-around cartridges

These cartridges are an incredible combination of CXP2 and CXP3 in all classic games. They are more powerful than other cartridges for shooting deer in some difficult situations. Furthermore, they are also common selections for Western combination mule deer and hunting elk in the Rocky Mountain.

Sometimes, you should use these types when shooting a bear in a harsh condition. They can help you get your targets up to 300 yards. In some cases, the lighter weight bullets like th3 140 grain in 7mm are the best choice. Nonetheless, be sure to take advanced shooting skills when you use these because they also have intimidating risks.

You probably find these cartridges in the 6.5mm-284, 6.5mm Remington Magnum, 6.5x68S, .264 Win. Magnum, .270 Winchester, .270 WSM, .270 Weatherby, 7×64 Brenneke, .280 Remington, .308 Marlin Express, .308 Winchester, .30-06, .303 British, 8x57JS and other similar cartridges.

An overview of the 30-30 Winchester

Though the 30-30 Winchester is an out-of-date version on the current market, it still shows its quality in the deer hunting range year-after-year.

There was a period of time the .30-30 kept a powerful cartridge in the industry through every deer camp of America.

Over the last decades, this cartridge helped hunters caught their targets perfectly in the hunting range. These days, its position could not drop as some hunters still use it in their shooting game.ư

About the 44 Magnum

The 44 Magnum is also one of the greatest cartridges during more decades. It totally is a helpful tool for hunters to shoot dead deer from countries around the world. Today, if a hunter still uses pistols or carbines, they will still choose the 44 Magnum.

There are some downsides of the 44 Magnum that some modern hunters do not love pretty much such as heavy, slow, and big. However, for those who do not mind these weak points, they probably prefer the 44 Magnum.

The 44. Magnum and the 30-30 – it is hard to compare

It is not easy to compare the 44. Magnum and 30-30 (when you want to find out these advantages and disadvantages as well). Each hunter will use these cartridges for their hunting purpose and the way they shoot their targets.

Perhaps, the 44. Magnum supports you expand your shooting up to 100 yards while the 30-30 possibly gets 50 yards only.

Some experienced hunters recognize that the hunting regulation in each state also impacts on how you pick your cartridge up. In other words, Illinois state authorization often approves the 30-30 and they will need to consider the 44. Magnum is an example of this mentioned point.

Final Words

Honestly, if your budget is can allow you to get more cartridges for your shooting, then you could purchase a lot of them like the 44 Magnum and 30-30 to check out your experience. These also become a wonderful couple when you want to get lots of cartridges and other necessary things for getting longer hunting seasons. Moreover, this is another chance to catch more animals in the deep forest. Why not?

How to start a militia in six simple steps

Whether you want to develop your basic skills or have fun with like-minded people, starting a militia could be an interesting idea. It’s an excellent way to enhance yourself mentally and physically but there are many things you have to pay attention to. From recruitment to training, it’s not easy to get a militia up and running without serious investments.  In the case that you are in need of guidance, this article shall tell you how to start a militia in six simple steps. Take a good look the information below in order to organize a militia successfully.

Depend on the law of state and country, the forming of a militia could be relatively tolerable or outright illegal.

That is why it’s best to check out the local regulations before you attempt to do anything. Determine what kind of militia is allowed to exist in your place and you won’t have to face potential troubles with the government. For most of the time, you often have little problem starting a neighborhood watch. On the other hand, armed organizations tend to be frowned upon since weapon possession is quite a sensitive issue in many regions.

With that being said, now let’s get down to business.

Step 1: Make yourself known

The first and foremost step of forming a militia is to present yourself to the world, hence, you need to come up with an identity. It’s recommended to pick a name and a logo that leave positive impressions on the general public and potential member. Do remember not to go for something too extreme or you may attract unwanted attention from the authority. A slogan is optional, it’s best to use words which are meaningful and memorable to inspire people to join your militia. Take some time to consider your options and try to make logical decisions.

Step 2: Recruitment

One member militia is kind of boring and tasteless so obviously, you have to seek out members among the crowd. The success of your recruitment effort relies on a wide range of factor from social standing to political climate. Of course, the purpose of the militia is also an important factor to consider as well. Sometimes, a clever use of the local situation could quickly fill your militia rank in a blink of an eye. For example, series of robberies or a lack of security in the area make thing easy to recruit member for a neighborhood watch.

Always be honest about your intention, no one want to join a militia that doesn’t operate like the descriptions. Because the members got to worry about their life, act reasonably and put together a flexible schedule for everyone.   Thanks to tools like the social network, it’s much easier to reach out to people compared to the old days. Start with your friends and expand from there, your friends know other friends and may invite them into your militia group if they are interested.  With luck, you should be able to recruit plenty of people.

Step 3: Socializing

With a bunch of member in your militia, the issue of socializing is very important to keep the group well connected. Let the members feel welcomed but don’t bother pleasing everyone because it’s impossible. Undesirable traits like self-centered, lazy, immature, egotistical and dishonest must be eliminated at once. You definitely don’t want to spend time with people that make you feel frustrated, the same can be said about others. Act fast or the membership of the militia could drop substantially in a short period of time.

The leader and instructors of the militia are positions of respect, the group may crumble if these positions are held by people not worthy of respect. If you happen to be the leader or an instructor, make sure that you earn the trust of your comrades before anything else.

Step 4: Training

The type of your militia will decide the kind of training provided at the place, it may range from first aid skill to weapon management and so on. The Internet is a great way to obtain the latest information on a variety of subject if needed though some filtering might be needed in certain cases. Military field manual is also an excellent source as well since it can provide with quality experiences and well-tested methods. Nonetheless, you probably have to invest a good amount of time and effort to figure out a suitable program for all members. Safety is number one priority, make sure everybody in the group got proper equipment and gear at each training session.

Step 5: Activity

Now you have an operational militia with plenty of trained personnel, it’s the time to conduct some activities. In the case that your militia is a civil defense group, there is little thing to be done unless your country is currently at war.  However, simple patrols or field exercises are a couple of activities to check the ability of the militia members.  You have to plan them out in advance along with a contingency solution people know what to do when things went south. After the conclusion of the activities, thoroughly review the performance of every member of the militia including yourself, there is always room for further improvement.

Step 6: Important tips

Never break the law, you must keep that in mind, the last thing you want to experience is to become an eyesore to the government. In fact, cooperate with the local authority whenever possible to show your organization benefits to the community. Promptly remove destructive elements from the militia, especially when they consistently fail to obey the group schedules and regulations. Always keep the original goal in sight and don’t lose it, letting trivial stuff to take over shall put an end to the militia in no time.


And that is all you should know about how to start a militia, not too hard to understand, right? Everything could appear to be hard at first but keep trying and you shall reach your goal before you know it. Take one step at a time and most important of all, try to have fun in the process.

How to clean a Ruger 10 22

You are interested in playing with Ruger rifles. You use your Ruger frequently but you may not really know the proper way to clean and make it shiny perfectly. You sometimes suppose that it is not truly necessary for you to clean it but your rifle still can stay with the best quality. To avoid the unexpected corrupts for your firearm, you absolutely should know how to make it clean all the time. It is how to last your Ruger’s lifetime and save your money to replace some parts of it. In my article, I will show you how I clean my loved Ruger. I hope that some of my experiences are able to help you a bit.

The needed tools and chemicals for cleaning your rifle

  1. Solvents

On the market, there are some different kind of solvents, I think that they are quite similar a little bit in case of the same price. That you use little or a lot of solvents for cleaning depends so much on how dirty and how long you haven’t cleaned your rifle.   

  1. Oil treatment

This can be used for cleaning your gun. Remember not add it to the receiver and built parts.

  1. Other tools

Start to clean

Preparation for cleaning

Firstly, check the semi-auto rifle to make sure that the magazine is not inside your rifle and it is empty. Then pull the charging handle back and check that the chamber is also empty and lick the rifle bolt for safety.

Clean the barrel, magazine, and bolt

  1. Try to loosen the front band screw and remove the front band then loosen your barrel stock screw also. To make the equal amount of button is exposed on each side you have to push safety button due to the designed trigger housing are of the stock.
  2. Change the barrel and receiver mechanism upward and take it away from the fore-end. You have to remember not losing the receiver and trigger housing cross pins that can slip out of the position.
  3. Place the mental cleaning brush on the rob with bore cleaner on it. Then push back the barrel to the receiver. Before pulling out the cleaning rob, you have to remove the bore brush. Put the brush back for the next run when the cleaning rod has cleared the barrel. Try to repeat this action 5 to9 times or until the barrel is clean without any dirt, grime and powder residue.
  4. Remove the bore brush and replace it with the patch tip. Place the clean dry patch on the tip to run it down the barrel from the muzzle to the receiver. Replace the dirty patch from the receiver by the clean one and pull it back through the barrel.Try to repeat it more than 3 times.
  5. Place the clean lubricated patch on the cleaning rod to run the cleaning rod down the barrel to lubricate the barrel.
  6. Use the soft metal wire brush to clean the receiver and bolt. It is useful for loosing dirt, grime and powder residue.
  7. Use some chemical-soaked gun cleaner to clean the bolt and receiver after that use it with the gun lubricant to lube the bolt and the receiver inside. Note that just use only one drop and do not overdo it.
  8. Use the gun lubricant to lube the receiver and trigger and various pivot points in the housing.
  9. After lubricating the barreled receiver, back into the stock. Add and tighten the stock screw. By the way, replace the front bad and tie the front band screw.
  10. Use the soft wire brush to remove the dirt so as to make sure the magazine clean.
  11. Put the empty magazine in the magazine and lock it then test.
  12. After testing the rifle wide down the barrel and other places that you touched on the rifle with the clean rag. It can help to prevent the sweat in your finger’s tips from rusting the exposed parts of the rifles.


The manufacturer advises that we should make a clean after every 500 rounds. Why we have to do that, it is not only to remove the powder residue from the internal components but also the rust prevention procedure. In the case that the gun was soaked or submerged in the water or in sand or the other foreign matter, it is absolute that the mechanism, the reliability of the functioning would get impaired. If you get this situation, you should find the way to make the gun totally dismantled and cleaned by the armor.

To close my concern, I want to remind you one important thing is that do not afraid of making wrong because everything can be recovered. Try to clean your Ruger as many times as possible to maintain it for long. Have a great day to all of my buddies! Thank you so much for your attention.

How many times you can reuse brass safely and effectively?

For most of the time, collecting and reusing the brass case of spent cartridges appear to be completely unnecessary. The average shooters can always obtain extra ammunition from stores if needed. You are able to use those ready – to – fire rounds once you take them out of the box. So why the idea of utilizing used brass case is so popular anyway? Well, the answer is that a lot of people prefer to use hand loaded ammunition than factory loaded ones. To a hand loader, knowing how many times you can reuse brass safely and effectively is really important. In the case you want to learn more about the subject, this article got what you need.

There are many factors you have to consider before you can actually reload the brass case and put it into the gun chamber. Besides the required tools and supplies, it’s recommended to keep an eye on the state of the case at all times. Should you ever detect cracks or any sights of structure compromises on a particular brass case then discard it right away. Firing cartridges with an unstable or damaged brass case may lead to a variety of shooting failures so be careful. The last thing you want to do is putting your health and your gun at risk when you can easily avoid it altogether. With that being said, now let’s gets down to business.

General principle

As you already know, a modern cartridge consists of four primary components: the bullet, the case, the propellant and the primer. After the round is expended, only the case remains around and in theory, you could reuse it for a couple of time. By outfitting the empty case with bullet, propellant and primer, you shall have a completed cartridge again but there are some issues. The stress of the firing will definitely take its toll on the case. Each time you reload and shoot, the strength of the case become lower and lower till it simply breaks.

The maximum number of reloads is variable since it depends on a lot of stuff from the user to manufacturer. Certain cases are capable of withstanding more than 50 reloads and still possess an excellent form for more in the future. On the other hand, there are cases which outright disintegrate after mere 2 or 3 reloads. Therefore, there is no fixed limit here though there are various estimates around for different calibers. Here are some of them but do keep in mind that you have to rely on the state of your own brass case to make the final decision.

Standard handgun rounds (9×18mm Makarov , 9×19mm Parabellum, .45 ACP, .380 ACP,…) : 6 – 8 times

High power handgun rounds (.44 Remington Magnum, .500 S&W Magnum, .50 Action Express,…): 3 – 5 times.

Low pressure rifle rounds (.22 LR, .22 Long,  .25 ACP, .25 Auto, …): 3 – 8 times

High pressure rifle rounds (.223 Remington, .300 Winchester Magnum, .308 Winchester,…): 3 – 5 times

Material of the case

Some manufacturers coat the brass case of their ammunition in nickel that greatly affects the reload potential. In order to get the nickel in, the thickness of the brass case must be reduced to accommodate the coat. Hence, the thinner wall of the nickel coated brass case can endure less reload than a non-coated one. Another issue is the nickel hardness, since nickel is harder than brass, it often hardens and become susceptible to cracking after multiple firings. Nickel coated brass cases also tend to split the neck relative quick as well.


The firings slowly but surely stretch the brass case so periodic trimmings are necessary to keep the overall dimension of the cartridge acceptable. It’s advised to trim the case when it split near the mouth or the primer is loose. Obviously, all the metals you remove in a trimming come from the case itself. Because of that, the wall thickness shall be steadily reduced to the point it can no longer handle the propellant power and burst when fire. Accurate trimming should be able to somewhat extend the lifetime of the case but it cannot prevent the eventual bursting from taking place.

No matter what is the caliber of the round, powerful powder load usually shorten the trimming interval.

In the average case, you only have to trim the brass case of rifle rounds, handgun rounds often burst before you experience size problem. However, should you want to have consistent crimp then by all mean trim to your heart’s content. For most of the time, people that want to trim handgun brass case mainly use revolvers instead of semi-automatic pistols.


Handloading permit the shooter to achieve the desired velocity and energy through the adjustment of propellant inside the brass case. Shooting reloaded cartridges at full powder charge is not always feasible though, especially if the case has gone through a lot of firings already. To be on the safe side, it’s best to use a moderate amount of propellant in reloaded cartridges, ideally 5 – 10% below the maximum load. As you become experience at handloading, you should know how the suitable charge to use by instinct. However, do remember to thoroughly inspect the body of the brass case nonetheless.

Failure sights

As stated above, you must never reuse a brass case when it starts showing sights of potential failures. Cracks and a split neck are enough to indicate that you really should toss the case away at the earliest opportunity.

Another prominent sight is the expansion of the primer pocket in the bottom of the case which makes the primer unable to have a good fit. You cannot expect a loosened primer to reliably ignite the propellant inside the case.  A disfigured rim may lead to feeding and extraction problems as well.

In the case you spot any of these sights on a brass case, it’s not worth the effort, time or risk to reuse it. Throw the case out and let that be it.


And that is most of what you should know about the process of reusing brass cases, fairly simple to understand, right? “How many times you can reuse brass?”. The answer to that question relies a lot on individual shooting style and experience. The caliber, the powder charge, the quality of the brass, ….Take all of them into account and you should be to come up with an answer on your own.

Ontario RAT 1 vs. Spyderco Tenacious Comparison And Review

Ontario RAT 1 and Spyderco tenacious are the mid-sized with the reasonable price which fits mostly our budge. They have a variety of options for blade edge and the place to put the belt clip and they also fit in your pocket easily as well as your hand. Especially, you do not need to care much about the quality and features. However, it will make you hard in choosing the one between two of these models. Thus, I want to show you some differences between them in order to support you in finding your best.

Spyderco tenacious review

Total length(closed) : 4.45 inches

blade length:3.39 inches

Blade thichkness: 0. 118 inches

Weight: 4.1 oz

Blade steel: 8Cr13MoV

This knife is a large folding knife, and I recommend it for using in the outdoor. Thus, for urban use, it can not meet the need because of the blade’s length. The Spyderco has the 3.39 inches blade with full length and being the usable edge. Besides, it is quite flexible because there are some options which save you from demanding to customize.

Its blade is quite thick, which means that it can put up with more abuse than the thinner blade. You are able to have this knife with the plain edge and a combo of two. Moreover, all of the blade options come with the selection of a black coating that held quick and the little sideways playing with the blade and without vertically when opening.

The plain edge of this knife has the benefit of the smooth cutting edge for fast and precise woek such as making feather sticks, whittling wood. Besides, this edge can make you easier in sharpening because you do not need to worry about the curves.

You also can use the serrated edge which can help you much in cutting ropes, branches, However, it would be tough to sharpen the serrated edge. One more edge is combe edge which has both a plain edge on the front and a combo edge on the back, but it is quite dangerous for users if you are not careful. It is an excellent edge option for every-day knife that you want to be versatile to do the variety of unplanned task.

The handle of the knife is a set of steel scawl coated in the textured G 10 laminate and fit in your hand. It is quite wide and gives the substance with not bulky. Because it is not the fixed blade knife so there is no sheath that goes with this blade. The small issue is that you can feel a little loose, but it is not the matter.

Ontario RAT 1 Review

General dimensions

Total length: 8.6 inches

Blade length: 3.5 inches

Handle length: 4.98 inches

Blade thickness: 0.114 inches

Weight: 5 ounces

Rat 1 has dual full liners which are joined and five sets of screws. The blade is flat on AUS -8 which provides a great compromise between the ease of sharpening and the compromise. Especially, the thumb jimping is quite large that can work well when gripped with gloves.

It has the broad blade with the flat grind and pronounced and it is similar to the rest of the other rat line up of knives, it toes the line between the clip point and the drop point. This knife also is the good choice for outdoor performance, and it has a lot of features which should appeal hunters as well as campers.

The length between the end of the finger and the start of the sharpened edge can make you feel a  little uncomfortable. The scales and the liners are not flush together, and there is no gap that will raise the hot spot. Especially, moving on to the blade is easy, and the grinds are precise, but the jumping is a little bit iffy.

One amazing thing is that the blade centering is near perfect when you close the knife. Besides, you can not discern blase play up or down or even side to side when you open the knife. The weight of handle is the gear, and the balance point is just in behind the index. That is down to full liners that are not skeletonized imparting the sturdy feeling.

It has the saber grip feel secure. Because of the handle weight, the pinch grip on the blade may clumsy. However, when moving back and pinching at the pivot, it brings things back into the balance. The weight and the size of this knife are comfortable for the users and fit into the pocket easily.

Comparison Ontario RAT 1 vs. Spyderco

  1. Handle scale

On the Ontario, it is the zytle kind which is vertically grippy, so it is very smooth and will not offers a lot of the grip. Besides, the shape is very suitable and natural for you to hold. The Spyderco has the grip G10 which is medium grippy.

  1. The deployment

About the lockup, they both have the liner locks the blade makes the liners pop into place. They both are very solid. However, the liner is thinner on the RAT 1 than the Spyderco; it is not the matter. On the tenacious, it has skeletonized liners. The weight of the Ontario rat one is heavier.

  1. The pocket clips

They both are very decent and have further three stalks. They also cover the surface area again with the handle being a slightly slippery easy to get out of the pocket. About the jimping, it is on the thumb ramp and the liner on the tenacious. On the Ontario RAT 1, we have some very spaced out jimping on between the blade and the handle so your thumb could slip a little bit. Besides, you have some conservative Jimping on the line.

  1. Steel

It is the 8 CR 13 MOV on the tenacious which is the high steel and easy to sharpen, but you can not get the nice sharp edge on it. The Ontario RAT one, it is us8 steel which is very sharp which can make the decent blade steel.

  1. Ergonomics

The despotic on the tenacious is comfortable. However, on the Ontario RAT 1, it has the large area where your fingers sit, and it is also contoured.

  1. Weight

The Ontario RAT 1 is heavier than the tenacious by 0.9 ounces. I think it is not much so it is not the big matter.

In conclusion, making a choice between Ontario RAT 1 and the tenacious is not a simple task. Thus, you should know well the information about them. And then try to make it fits your need. I hope that my page can be useful for you and thank you for reading.

Spyderco Endura vs Delica – The folding knife reviews

I know for sure that you all have heard about Spyderco – a big brother for the knife enthusiast community. There are tons of models which were born by such brand. This time, it is a deep insight into two fascinating kids of the Spyderco, namely, Spyderco Endura vs Delica.

A little introduction

It is the fact that you entirely cannot feel the perfection of the Spyderco Endura until you have a real touch on. The brand has owned the Endura for many years.  Basing on predecessors, it experienced uncountable times of refining to get the today quality and belong to the list of the best EDC fixed blade knife.

Along with the Endura, The Delica has won appreciation from customers as one of the most well-known models of the Spyderco. Being at launch in 1990, it is much older than the Endura. And now, new versions are available with plain edges and numerous color options for the handle.

Dimensions and details

Undoubtedly, both dimensions and details of the Spyderco Endura and Delica cannot be the same. So, how can their own’s make the difference?


With an origin from Japan, this product line shows the length of 3.75” for the blade and 8.75” for the total. Besides, its weight is 3.6 ounces. The appeal lies in a lightweight. Despite a large appearance, the Endura is not too heavy to hold and even pocketable.

Among four generation of the Endura, there is an outstanding feature in the blade which is not only long but also slender. The shape comes with a process of grinding from the spine to the bevel to make it flat.

Moreover, the VG-10 is in use for such knife line of the Spyderco. Here is a kind of steel from Japan with a capacity of building excellent edge retention without corrosion.


A common reason why people keep choosing the Delica for daily carrying is its light weight. Just 2.5 ounces, the knife makes it easy to bear on every upcoming journey. Thanks to a quad-mount pocket clip design, it is possible for you to adjust for clipping up or down and carrying with left or right hand whenever you want.

At the state of opening, the overall length gets 7.125” and 2.8” is for the blade.  Maybe, the Delica looks like a little edition of the Endura with a 3.75-inch blade.  Additionally, for a convenient carry, there is a lanyard hole on the side of the holder.

Handle and lock

Along the dimensions, they are the handle and lock which are in need for us to consider these products – two in many of the best Spyderco knife.

The Spyderco chose the fiberglass added FRN to make the handle of the Endura. And liners of steel will be nested with the purpose of cutting as much weight as possible. In general, its handle brings users a light and convenient feeling with a broad range of colors such as green and orange. In fact, the Endura cannot provide you with the toughest handle. But somehow, it offers most of the daily usage.

Ergonomics are good enough for you to reach multiple styles including forward and reverse ones for grips. To optimizing reach, you can almost put your hand backward and then make the best use of a jimp ramp. The manufacturer covers corners with the FRN to empower them to go well with textured flats. Especially, the smart bi-directional texturing of the Spyderco makes it possible no matter what condition the grip is in.

Furthermore, the spoon-style clip in the black cover of the Endura has got a lot of implement.  In the pocket, it always rides low so that the great retention is ready all the time.

As for the Delica, its handle is from the material of fiberglass and with the FRN which comes with frames of stainless steel. Between the blade and liner, there is totally no gaps at all. Admittedly, the cases of rubbing against liners will not occur, and you can open or close the knife smoothly.

Like the Endura, the Delica knife also presents the bidirectional texture. Hence, the handle of the knife meets even strict requirements for the heavy usage.


The thumb hole in the Endura has a length of 13mm which is large enough for deployment. If you are a lover of such detail, it will not make you disappointed. The hold has a function of make room for your thumb to get the convenience. Just by one flick, the knife opens smoothly by the support of this perfect structure as well as washers. For more detailed, these washers are at the low phosphor friction.

On the other side, the Delica performs the mid-locking mechanism. And there is no case of up and down as some people still talk about. This mechanism of looking plays a significant role in keeping the knife handle thinner. Simultaneously, its work is also effective in making sure that the knife is locked when it is in the open position.

Wrap up                                   

For decades, both Endura and Delica have been the staples of the Spyderco brands. Each of them has outstanding features by their own to build up the prestigious of the brand today. They are all ideal products for daily carrying, yet still big enough for multi-usage in need with a lot of color choices.

In term of the prices, in the market, the Endura knife seems to be more expensive. However, in comparison of Spyderco Endura vs Delica, they have nearly the same material and designs. At this point, the former is highly recommended.

Moreover, there is a flaw found in the Endura one. The thing is the problem of the blade development. For cases of cutting the hard objects, the knife will find difficulties. It means that the Endura is only suitable to act as a light-to-medium tool. Because of this minus point, the Delica takes advantage over its rival in my opinion.

Leatherman Surge vs. Super Tool 300: Which is the multi – tool for you?

Whether you are an experienced mechanic or just a usual house owner, having a large number of tools around can be troublesome. When the need arises, you might have to go through a heap of items to get the right thing to use. You probably have to constantly change tool too which may be tenuous and time consuming to cope with. Well, if you truly want an effective solution, a multi-tool is going to be your best bet. In the case that you happen to be searching for one, this article can provide a review of two excellent products

It’s worth noting that there is no such thing as the best product, only a product that can better fit your needs. The same thing can be applied here to the comparison between the Leatherman products down below. Leatherman Surge vs. Super Tool 300, which one is the multi-tool you should buy? The only way to make a wise decision is to exam their specification and feature closely. Crosscheck them with your preferences and requirement in order to ensure that your investment is well-spent money. Now, let’s take a closer look at them.

Size and dimension

Leatherman Surge

  • The length when closed: 4.5 Inches
  • The length of the primary blade: 3.1 Inches
  • The weight: 12.5 Ounces
  • The number of available tools: 21

Leatherman Super Tool 300

  • The length when closed: 4.5 Inches
  • The length of the primary blade: 3.2 Inches
  • The weight: 9.6 Ounces
  • The number of available tools: 19

From the first glance, you may feel that the Surge and the Super Tool 300 look pretty much the same when closed. However, the Surge is the heavier one among the two and offer more tool at your disposal. One of the chief complaints of the Surge is its weight that makes it kind of inconvenient to carry. That is why the Super Tool 300 is a nice choice if you prefer a lighter alternative at the expense of a number of tools. Both are great multi-tool nerveless that can deal with a variety of material and contraption without notable trouble.

Material and feature

Leatherman Surge and Super Tool 300 utilize stainless steel in their construction which makes them exceptionally durable. They are mean to withstand tremendous abuse and remain perfectly functional for a long time. Certain components can be readily replaced should you spot any traits of defect or damage. The feature that distinguishes one from the other would the tool they have. While they provide nearly the same set of tool, they did have several different which you can tell upon close inspection.

When it comes to the feature, there are around 16 common tools between the Surge and the Super Tool 300. For the rest, each of the Leatherman products comes with a different stuff to fit unique purposes. If you look for a heavy duty all around multi-tool, there is a good chance that you could find what you need on one of them. They are not really adequate for people that want a mini, ultra light multi-tool though. While compact, the Surge and the Super Tool 300 weight and dimension are rather considerable.

Ease of use

With an assortment of tools on board, the first impression of Leatherman Surge is that it might be a bit tricky to use. Quite on the contrary, you can access and use all the features relatively quick and smooth. Multiple tools can be deployed at the same time without the need to close some of them back first.  The locking system is tough, reliable and easy to operate but regular cleaning is necessary to remove foreign particle which can jam it. Its profile is substantial so people with a small hand can have a hard time getting a good grip on the body.

As a solid – built multi-tool, Leatherman Super Tool 300 is the answer for people that want an on-hand solution at any given time. It can easily replace half of your toolbox yet still permit respectable performance compared to single full-size tools. One minor downside is that you have to deploy this multi-tool to fully use its feature. To put it short, the features are inaccessible from the outside. Later models of Leatherman multi-tool such as the OHT doesn’t have the same restriction.  Its operation is still fluid though and can match your expectation with ease.

Why bother carrying around a bunch of tools instead of just one multi-tool which can do just as good? With up to 21 tools, the Surge allows you to come up with an appropriate response in a wide range of situation. Its durability and reliability ensure maximum effectiveness in any conditions. You may feel that it’s a bit cumbersome and bulky but the Surge versatility totally make up for that. Compare to a toolbox, it’s much easier to carry though shirt and pant pockets aren’t exactly the way to transport the Surge.

If you like the idea behind the Surge but want something that weighs a bit less, Super Tool 300 can fulfill that condition. At a much lighter weight, it let the user operate any tool quickly and conveniently. The number of tools is not as high as the Surge but still more than enough to pull you through the average task. You probably feel that its price tag is a bit high but the Super Tool 300 usefulness on the field can justify it. With just one investment, you can own a great multi-tool that will serve you well for quite some time.


And that should be it, have you manage to make your final decision yet? By checking out the comparison about Leatherman Surge vs. Super Tool 300 above, you will know about their pros and cons. The key to a wise purchase is that the product must be able to meet your demand with acceptable shortcomings. As long as you can ensure that, you can achieve maximum satisfaction with your decision. Stubborn screw and alike can no longer give you any trouble now.