Stop Police Terror

A quick review between ESEE-3 vs. Izula 2

Traveling around on your free time is a great way to relax your and refresh your body after tenuous times at work. But no matter if you choose motorcycling or hiking as your preferred method, you always need to prepare yourself. One of many things that are utmost necessary for a trip on the road or in the forest is a cutting tool. A durable, compact and lightweight knife would be a wonderful choice for such an item. It will come in handy in a lot of situations and scenarios. And if you happen to be in need of one, this article got just the thing for you.

For outdoor travels, you need to make sure that everything you carry must be as useful and practical as possible. They must be simple, durable and effective at their jobs when you are far from the comforts of your home. When it comes to portable knifes, ESEE got great products that can match a variety of tasks and needs. If you are interested in checking some of them, you can find that right here. Below is a quick review between ESEE-3 vs. Izula 2, both are excellent slim, fixed – blade knifes for your consideration.

General specification


  • The entire length: 8.31 Inches (Standard Model) 8.19 Inches (Modified Pommel)
  • The blade length: 3.88 Inches
  • The maximum thickness: 0.125 Inches
  • The weight of the knife: 5.2 Ounces
  • The weight of the knife + sheath: 9.3 Ounces

Izula 2

  • The entire length: 6.75 Inches
  • The blade length: 2.63 Inches
  • The maximum thickness: 0. 156 Inches
  • The weight of the knife: 3.2 Ounces
  • The weight of the knife + sheath: 3.9 Ounces

From the figures above, you may see that the ESEE-3 is bulkier and heavier than the Izula 2. In the opposite, the Izula 2 got a higher maximum thickness of the two.  The difference in the dimension means that depend on the tasks and user preference, one may look more attracting than the other. While these knifes profile will have no trouble fitting in your front pant pocket, the ESEE-3 will be slightly more noticeable. It will also take up the entire pocket of your when the Izula 2 requirement for space is much lower.

As with any other ESEE knife, the ESEE-3 and Izula 2 employ 1095 High Carbon as the choice for blade steel. This is a very strong and high endurance material which performs well even in extreme conditions. Its ability to retain edge is good and relatively easy to sharpen. They are also not prone to chip or break in awkward angles and improper uses of force. However, 1095 is not a stainless steel so if you are not careful, rust can form on the blade. In order to combat this issue, powder coating has been employed on all Izula 2 and versions of ESEE-3

If you happen to get an uncoated ESEE-3, regular uses of WD – 40 or oil will be sufficient to prevent rust.

Handle construction

The ESEE-3 handle is made from Micarta that is secured to the tang by 3 Allen bolts. Its scales are well milled which provides a comfortable and tight grip for your hand. Employing a fluid and straightforward design, the handle doesn’t have any obstructing gaps and edges. The overall size of handle is enough even for people with large hands. This is a major plus given that in order to use a knife effectively, its handle must have a good fit in the user’s hand. For a small knife like the ESEE-3, the handle functions perfectly at its purpose.

Another unique feature of the ESEE-3 is its butt (or pommel). It got a pointed appearance and can be used to force your way through tough material such as glass. Within the pommel is a lanyard hole so you can slide Paracord or anything you like through and make a loop. That will be useful as a way to carry the knife which makes it quite visible so you don’t accidentally lose it.

In the Izula 2 case, you can choose a lot of things to act as a handle. A regular product will come with a hollow handle so you choose whatever want. If you want the knife to have a conventional appearance, you can purchase a standard ESEE Micarta handle and put it in. Using Allen bolts, the Micarta handle offers a stable handling to the knife and a good grip. It soaks up moisture or even sweats in both dry and wet conditions. This means you won’t have any slippery experience when using the knife.

Should you want something a bit more stylish and inexpensive, Paracord is a great option. Just wrap the Izula 2 skeleton handle with Paracord and you got a nice holding to the knife. Now instead of the blade alone, you can also readily use the Paracord on the knife handle whenever a need arises.

Sheath design

Both the ESEE-3 and Izula 2 got great sheaths which are very safe and comfortable to operate. The knifes slide in their sheaths smoothly and result in a noticeable “snap” when fully secured. They also permit you a wide range of mounting options too. You can either use the hole on them to secure the sheaths to your pant belt using Paracord. You can also use an extra mounting adapter to clip the sheath in the pant front or back pocket. You can go with anything that you decide to be the best for your body.


And that should cover the basic information between ESEE-3 vs. Izula 2, pretty easy to absorb, right? Both are great knifes for a portable cutting tool and quite sturdy. Support by a generous warranty by ESEE, you will see that each of the knifes is a totally wise investment. So compare their characteristics with your own requirements and needs then you can decide on which is the better knife to use.  AS long as you can do that, you will come into possession of an effective and practical tool for your trips


Spyderco Endura vs Delica – The folding knife reviews

I know for sure that you all have heard about Spyderco – a big brother for the knife enthusiast community. There are tons of models which were born by such brand. This time, it is a deep insight into two fascinating kids of the Spyderco, namely, Spyderco Endura vs Delica.

A little introduction

It is the fact that you entirely cannot feel the perfection of the Spyderco Endura until you have a real touch on. The brand has owned the Endura for many years.  Basing on predecessors, it experienced uncountable times of refining to get the today quality and belong to the list of the best EDC fixed blade knife.

Along with the Endura, The Delica has won appreciation from customers as one of the most well-known models of the Spyderco. Being at launch in 1990, it is much older than the Endura. And now, new versions are available with plain edges and numerous color options for the handle.

Dimensions and details

Undoubtedly, both dimensions and details of the Spyderco Endura and Delica cannot be the same. So, how can their own’s make the difference?


With an origin from Japan, this product line shows the length of 3.75” for the blade and 8.75” for the total. Besides, its weight is 3.6 ounces. The appeal lies in a lightweight. Despite a large appearance, the Endura is not too heavy to hold and even pocketable.

Among four generation of the Endura, there is an outstanding feature in the blade which is not only long but also slender. The shape comes with a process of grinding from the spine to the bevel to make it flat.

Moreover, the VG-10 is in use for such knife line of the Spyderco. Here is a kind of steel from Japan with a capacity of building excellent edge retention without corrosion.


A common reason why people keep choosing the Delica for daily carrying is its light weight. Just 2.5 ounces, the knife makes it easy to bear on every upcoming journey. Thanks to a quad-mount pocket clip design, it is possible for you to adjust for clipping up or down and carrying with left or right hand whenever you want.

At the state of opening, the overall length gets 7.125” and 2.8” is for the blade.  Maybe, the Delica looks like a little edition of the Endura with a 3.75-inch blade.  Additionally, for a convenient carry, there is a lanyard hole on the side of the holder.

Handle and lock

Along the dimensions, they are the handle and lock which are in need for us to consider these products – two in many of the best Spyderco knife.

The Spyderco chose the fiberglass added FRN to make the handle of the Endura. And liners of steel will be nested with the purpose of cutting as much weight as possible. In general, its handle brings users a light and convenient feeling with a broad range of colors such as green and orange. In fact, the Endura cannot provide you with the toughest handle. But somehow, it offers most of the daily usage.

Ergonomics are good enough for you to reach multiple styles including forward and reverse ones for grips. To optimizing reach, you can almost put your hand backward and then make the best use of a jimp ramp. The manufacturer covers corners with the FRN to empower them to go well with textured flats. Especially, the smart bi-directional texturing of the Spyderco makes it possible no matter what condition the grip is in.

Furthermore, the spoon-style clip in the black cover of the Endura has got a lot of implement.  In the pocket, it always rides low so that the great retention is ready all the time.

As for the Delica, its handle is from the material of fiberglass and with the FRN which comes with frames of stainless steel. Between the blade and liner, there is totally no gaps at all. Admittedly, the cases of rubbing against liners will not occur, and you can open or close the knife smoothly.

Like the Endura, the Delica knife also presents the bidirectional texture. Hence, the handle of the knife meets even strict requirements for the heavy usage.


The thumb hole in the Endura has a length of 13mm which is large enough for deployment. If you are a lover of such detail, it will not make you disappointed. The hold has a function of make room for your thumb to get the convenience. Just by one flick, the knife opens smoothly by the support of this perfect structure as well as washers. For more detailed, these washers are at the low phosphor friction.

On the other side, the Delica performs the mid-locking mechanism. And there is no case of up and down as some people still talk about. This mechanism of looking plays a significant role in keeping the knife handle thinner. Simultaneously, its work is also effective in making sure that the knife is locked when it is in the open position.

Wrap up                                   

For decades, both Endura and Delica have been the staples of the Spyderco brands. Each of them has outstanding features by their own to build up the prestigious of the brand today. They are all ideal products for daily carrying, yet still big enough for multi-usage in need with a lot of color choices.

In term of the prices, in the market, the Endura knife seems to be more expensive. However, in comparison of Spyderco Endura vs Delica, they have nearly the same material and designs. At this point, the former is highly recommended.

Moreover, there is a flaw found in the Endura one. The thing is the problem of the blade development. For cases of cutting the hard objects, the knife will find difficulties. It means that the Endura is only suitable to act as a light-to-medium tool. Because of this minus point, the Delica takes advantage over its rival in my opinion.

CTS-XHP vs. M390: Which one is more suitable for your knife?

When it comes to a knife, everybody wants a durable, flexible and long lasting product. Yet the effectiveness of the knife relies on several factors and one of them is the blade steel. There is a variety of material that can be used to forge the knife blade. It’s is nearly impossible to judge whether a knife is made from quality steel or not by looking alone. That is why it’s essential to know the name of several excellent types of steel available. Today in this article, you can learn some interesting information about two premium blade steels: CTS-XHP vs. M390

There is no such thing as the best steel, each got their own pros and cons. Depend on the user demands and requirements, one type of steel will look more promising than the others. So it all comes down to the personal preference and working conditions of the knife. In order to ensure that you won’t waste your money, you need to have a firm knowledge on the blade steel characteristic. This is vital in the process of picking a usable and practical knife to use. And you can find just that right below. Check them out and see if one of them looks more suitable than the other

General information

CTS-XHP is a relatively new and uncommon type of steel developed by Carpenter Technology Corporation. However, it got a lot potential to become a popular and widely use steel in the future. Member of the CTS steel line, the CTS-XHP is another powder-based metal that offers respectable corrosion resistance. It is usually compared to the CPM S30V steel and demonstrates slightly superior corrosion resistance and edge retention. But the CTS-XHP also proves to be harder to sharpen and lack the hardness of the Crucible steel.

Bohler M390 Mircroclean, or M390 for short, is also a type of steel that is introduced not too long ago. It got a unique and innovative combination of alloys that permits exceptional resistance against wear and corrosion. The use of the latest technology allows for a nice mixture of molybdenum, tungsten and alike to create a durable steel. Everything makes the M390 only become more and more attractive to the people eye as an excellent choice for a knife blade.  Its popularity on the market has increased fairly fast and strong since the M390 introduction day.

Steel composition

Carpenter CTS-XHP

  • Carbon: 1.60%
  • Chromium: 16.0%
  • Molybdenum: 0.80%
  • Vanadium: 0.45%
  • Nickel: 0.35%
  • Manganese: 0.50%
  • Silicon: 0.40%

The high percentage of Chromium means that the CTS-XHP got a nice resistance to abrasion and corrosion. It will also strengthen the steel hardness though not to the point of others such as the S30V. Humidity and general moisture will have little effect upon the CTS-XHP. Using this type of steel in a knife blade will result in a keen and sharp cutting edge. The presence of Carbon should also enhance the steel performance in heavy-duty tasks.  Utilizing advanced metallurgy procedures, CTS-XHP is a premium and quality steel.

Bohler M390 Mircroclean

Bohler M390 Mircroclean
Bohler M390 Mircroclean
  • Carbon: 1.90%
  • Chromium: 20.0%
  • Molybdenum: 1.00%
  • Tungsten: 0.60%
  • Vanadium: 4.00%
  • Manganese: 0.30%
  • Silicon: 0.70%

Also got a high level of Chromium in it, the M390 steel possesses substantial wear and tear resistance. Couple with Carbon and Vanadium, they considerably increase the steel integrity, hardness, and sharpness. Maintaining and sharpening the M390 remain fairly simple and easy to execute. This makes it a popular blade steel for high ends knife thanks to these characteristics. It can hold its edge for quite some time and when you eventually need to sharpen it, there won’t be any burr forming. Therefore, the possibility of wire edge is also eliminated as well.

Ease of use

Both the CTS-XHP and the M390 has excellent retention rate with M390 in the lead due to its Vanadium. However, this also makes it marginally harder to sharpen in certain case compare to the CTS-XHP. A M390 blade is tough, high endurance and can deal with heavy duty tasks. So if you want something that can withstand lots of abuses for long hours work, the M390 should serve you well as the blade material. Its performance is more than enough to handle anything that you can expect in a premium knife.

While it doesn’t hold the edge as long as the M390, the CTS-XHP is still a good all – around steel. Its efficient composition of alloy ensures that you can use a CTS-XHP blade on a wide range tasks. So you will see that this type of steel is more versatile in the hand of an average knife user. It got a competitive performance due to the steel toughness, sharpness and respectable resistance. Should you in need of a knife for light duty tasks, you can’t go wrong with the CTS-XHP. The steel effectiveness will not make you disappointed.


In order to make a logical and informed purchase, you need to look out and inspect all information of the product. Same with the knife, you need to know exactly what kind of steel its blade is using. It must be suitable to the purpose of the knife and the environment that you intend to use the knife in.  This is how you can achieve a wise investment and obtain a much-needed tool for your uses. Both the M390 and the CTS-XHP are great steel but in the end, the deciding factor will be their suitability to your own needs and requirements.


And that should cover all the basic points, not too hard to absorb, right? A knife primary function lies within its blade and so that part is very important. If you are considering a material for your high ends knife, the comparison between CTS-XHP vs. M390 will definitely come useful. Take a look at the above and one of them may happen to fit all of your conditions for a suitable blade steel.

Ontario RAT 1 vs. Spyderco Tenacious Comparison And Review

Ontario RAT 1 and Spyderco tenacious are the mid-sized with the reasonable price which fits mostly our budge. They have a variety of options for blade edge and the place to put the belt clip and they also fit in your pocket easily as well as your hand. Especially, you do not need to care much about the quality and features. However, it will make you hard in choosing the one between two of these models. Thus, I want to show you some differences between them in order to support you in finding your best.

Spyderco tenacious review

Total length(closed) : 4.45 inches

blade length:3.39 inches

Blade thichkness: 0. 118 inches

Weight: 4.1 oz

Blade steel: 8Cr13MoV

This knife is a large folding knife, and I recommend it for using in the outdoor. Thus, for urban use, it can not meet the need because of the blade’s length. The Spyderco has the 3.39 inches blade with full length and being the usable edge. Besides, it is quite flexible because there are some options which save you from demanding to customize.

Its blade is quite thick, which means that it can put up with more abuse than the thinner blade. You are able to have this knife with the plain edge and a combo of two. Moreover, all of the blade options come with the selection of a black coating that held quick and the little sideways playing with the blade and without vertically when opening.

The plain edge of this knife has the benefit of the smooth cutting edge for fast and precise woek such as making feather sticks, whittling wood. Besides, this edge can make you easier in sharpening because you do not need to worry about the curves.

You also can use the serrated edge which can help you much in cutting ropes, branches, However, it would be tough to sharpen the serrated edge. One more edge is combe edge which has both a plain edge on the front and a combo edge on the back, but it is quite dangerous for users if you are not careful. It is an excellent edge option for every-day knife that you want to be versatile to do the variety of unplanned task.

The handle of the knife is a set of steel scawl coated in the textured G 10 laminate and fit in your hand. It is quite wide and gives the substance with not bulky. Because it is not the fixed blade knife so there is no sheath that goes with this blade. The small issue is that you can feel a little loose, but it is not the matter.

Ontario RAT 1 Review

General dimensions

Total length: 8.6 inches

Blade length: 3.5 inches

Handle length: 4.98 inches

Blade thickness: 0.114 inches

Weight: 5 ounces

Rat 1 has dual full liners which are joined and five sets of screws. The blade is flat on AUS -8 which provides a great compromise between the ease of sharpening and the compromise. Especially, the thumb jimping is quite large that can work well when gripped with gloves.

It has the broad blade with the flat grind and pronounced and it is similar to the rest of the other rat line up of knives, it toes the line between the clip point and the drop point. This knife also is the good choice for outdoor performance, and it has a lot of features which should appeal hunters as well as campers.

The length between the end of the finger and the start of the sharpened edge can make you feel a  little uncomfortable. The scales and the liners are not flush together, and there is no gap that will raise the hot spot. Especially, moving on to the blade is easy, and the grinds are precise, but the jumping is a little bit iffy.

One amazing thing is that the blade centering is near perfect when you close the knife. Besides, you can not discern blase play up or down or even side to side when you open the knife. The weight of handle is the gear, and the balance point is just in behind the index. That is down to full liners that are not skeletonized imparting the sturdy feeling.

It has the saber grip feel secure. Because of the handle weight, the pinch grip on the blade may clumsy. However, when moving back and pinching at the pivot, it brings things back into the balance. The weight and the size of this knife are comfortable for the users and fit into the pocket easily.

Comparison Ontario RAT 1 vs. Spyderco

  1. Handle scale

On the Ontario, it is the zytle kind which is vertically grippy, so it is very smooth and will not offers a lot of the grip. Besides, the shape is very suitable and natural for you to hold. The Spyderco has the grip G10 which is medium grippy.

  1. The deployment

About the lockup, they both have the liner locks the blade makes the liners pop into place. They both are very solid. However, the liner is thinner on the RAT 1 than the Spyderco; it is not the matter. On the tenacious, it has skeletonized liners. The weight of the Ontario rat one is heavier.

  1. The pocket clips

They both are very decent and have further three stalks. They also cover the surface area again with the handle being a slightly slippery easy to get out of the pocket. About the jimping, it is on the thumb ramp and the liner on the tenacious. On the Ontario RAT 1, we have some very spaced out jimping on between the blade and the handle so your thumb could slip a little bit. Besides, you have some conservative Jimping on the line.

  1. Steel

It is the 8 CR 13 MOV on the tenacious which is the high steel and easy to sharpen, but you can not get the nice sharp edge on it. The Ontario RAT one, it is us8 steel which is very sharp which can make the decent blade steel.

  1. Ergonomics

The despotic on the tenacious is comfortable. However, on the Ontario RAT 1, it has the large area where your fingers sit, and it is also contoured.

  1. Weight

The Ontario RAT 1 is heavier than the tenacious by 0.9 ounces. I think it is not much so it is not the big matter.

In conclusion, making a choice between Ontario RAT 1 and the tenacious is not a simple task. Thus, you should know well the information about them. And then try to make it fits your need. I hope that my page can be useful for you and thank you for reading.

A quick review of the SOG Seal Pup vs. Seal Pup Elite

From biking to hiking, there will be times when a good knife can really come in handy. For such outdoor activities, a cutting tool could assist you in a variety of tasks. While knifes with a foldable blade is compact and light, durability and simplicity of fixed blade ones are worth considering. When you want something that got a bit of strength, fixed blade knife will not disappoint you. So if you are looking for a good product in this category, this article could be of use to you. You will be provided with a comparison between two excellent knifes: SOG Seal Pup vs. Seal Pup Elite

Both the Seal Pup and the Seal Pup Elite are products of SOG Specialty Knives, a well-known brand for quality and robust knifes. Their reproduction and development of the original Vietnam War – era SOG knifes have become quite popular around. One of the company famous products is the Seal 2000 which is employed by the United States SEAL force. The SEAL 2000 then become the basis of the Seal Pup and the Seal Pup Elite. Now, let take a closer look at features and specifications of these great knifes.

Sizes and dimension

SOG Seal Pup

  • The overall length: 9 Inches
  • The blade length: 4.75 Inches
  • The blade thickness: 0.19 Inches
  • The knife weight: 5.40 Ounces
  • The type of spine: Straight
  • The type of edge: Partly Serrated

SOG Seal Pup Elite

  • The overall length: 9.5 Inches
  • The blade length: 4.85 Inches
  • The blade thickness: 0.19 Inches
  • The knife weight: 5.40 Ounces
  • The type of spine: Rasp
  • The type of edge: Straight

Base on the figures above, you may see that the Seal Pup Elite is slightly longer than the Seal Pup. Several design features between the two are also not the same. As a result, the Seal Pup Elite is more suitable for heavy-duty tasks and long – hour works. It possesses respectable power when you use it for splitting, chopping or batoning. But if you only need a knife for the general usages, the Seal Pup would be sufficient in most case. It is a lightweight knife that should perform adequately in the average situations.

Handle construction


Utilizing glass reinforced nylon, the Seal Pup handle provides you with a tough and nicely fit holding. With a thump ramp and grooves for other fingers, you will have a solid and stable grip all the times. The overall size of the handle is just right so you can hold it tightly in your hand. Both sides of the handle are well textured for increased friction and prevent slipping due to moisture or sweat. Since the material doesn’t retain heat or cold, you can use the knife comfortable in any level of temperature, indoor or outdoor.

The Seal Pup Elite handle is made from glass reinforced Zytel with finger grooves. It’s an ergonomic design that reduces the hand fatigue when you have to use the knife for a long period of time. The extensive textured scales ensure smooth, non – slippery working experiences even the knife get wet. However, should you hand is on the larger size, it may be a bit uncomfortable to hold.  It did have a finger choil to better control the knife though and is longer than the Seal Pup handle though. Each of the handle grooves is deep so you can conveniently warp your finger around it without an issue.


The Seal Pup blade is a sturdy construction with a sharp edge that can offer admirable performance. It’s powder – coated so resistances against corrosion and abrasion are quite substantial. The use of quality steel means that it will serve you well for years to come as the premium utility knife. It doesn’t work as well as a survival knife though since it is best used for light duty tasks. The serration on the blade spine can be quite troublesome at certain cases. If you apply too much force and choke up on the blade, your index finger may end up with a nasty scratch.

Thanks to the advanced heat treated process and metallurgy, the Seal Pup Elite blade integrity and edge retention are great.  Its sharpness is excellent so with just a small amount of pressure is enough to result in a cleaned and smooth cut. The titanium nitride coating should make sure that rust and wearing will never trouble you too much. That is why the Seal Pup Elite is a good choice for a survival knife. Extend exposure to the weather and nature elements should have little effects on the knife operation.


For a sheath, the Seal Pup knife can either use the usual nylon sheath or an optional Kydex one. Both work great but the nylon sheath comes with the knife so you don’t have to waste extras money. It’s well built and strengthens with plastic between layers to give the sheath a rigid and straight body. With an assortment of attaching points on the back, you can put it on wherever you want. The retention strap is a snap and Velcro design so you can be sure that the knife will stay secure inside the sheath until when you need it.

Same as the Seal Pup, the Seal Pup Elite also use a nylon sheath. It extra compartments means that besides the knife, you can also carry a shaping stone and a fire starter. This really increases the knife versatility in outdoor environments. Or if you like a solid container, you can always switch to the Kydex sheath. Any of these sheaths feature multiple ways to attach them to the pant belt or anywhere you desire. A sheath is a good way to safely carry the knife so go with whatever type of sheath you want. They work wonderfully at their jobs.


And that should be most of the basic point, rather easy to take in, right? To say that a knife is good to use or not, you have to depend on your own needs and requirements. Each of the knifes is unique with own pros and cons. So if you are considering getting a SOG knife, a comparison between SOG Seal Pup vs. Seal Pup Elite can help you make up your mind. Crosscheck the knife characteristic to your preferences and then you can make a wise and informed purchase.

How to start a militia in six simple steps

Whether you want to develop your basic skills or have fun with like-minded people, starting a militia could be an interesting idea. It’s an excellent way to enhance yourself mentally and physically but there are many things you have to pay attention to. From recruitment to training, it’s not easy to get a militia up and running without serious investments.  In the case that you are in need of guidance, this article shall tell you how to start a militia in six simple steps. Take a good look the information below in order to organize a militia successfully.

Depend on the law of state and country, the forming of a militia could be relatively tolerable or outright illegal.

That is why it’s best to check out the local regulations before you attempt to do anything. Determine what kind of militia is allowed to exist in your place and you won’t have to face potential troubles with the government. For most of the time, you often have little problem starting a neighborhood watch. On the other hand, armed organizations tend to be frowned upon since weapon possession is quite a sensitive issue in many regions.

With that being said, now let’s get down to business.

Step 1: Make yourself known

The first and foremost step of forming a militia is to present yourself to the world, hence, you need to come up with an identity. It’s recommended to pick a name and a logo that leave positive impressions on the general public and potential member. Do remember not to go for something too extreme or you may attract unwanted attention from the authority. A slogan is optional, it’s best to use words which are meaningful and memorable to inspire people to join your militia. Take some time to consider your options and try to make logical decisions.

Step 2: Recruitment

One member militia is kind of boring and tasteless so obviously, you have to seek out members among the crowd. The success of your recruitment effort relies on a wide range of factor from social standing to political climate. Of course, the purpose of the militia is also an important factor to consider as well. Sometimes, a clever use of the local situation could quickly fill your militia rank in a blink of an eye. For example, series of robberies or a lack of security in the area make thing easy to recruit member for a neighborhood watch.

Always be honest about your intention, no one want to join a militia that doesn’t operate like the descriptions. Because the members got to worry about their life, act reasonably and put together a flexible schedule for everyone.   Thanks to tools like the social network, it’s much easier to reach out to people compared to the old days. Start with your friends and expand from there, your friends know other friends and may invite them into your militia group if they are interested.  With luck, you should be able to recruit plenty of people.

Step 3: Socializing

With a bunch of member in your militia, the issue of socializing is very important to keep the group well connected. Let the members feel welcomed but don’t bother pleasing everyone because it’s impossible. Undesirable traits like self-centered, lazy, immature, egotistical and dishonest must be eliminated at once. You definitely don’t want to spend time with people that make you feel frustrated, the same can be said about others. Act fast or the membership of the militia could drop substantially in a short period of time.

The leader and instructors of the militia are positions of respect, the group may crumble if these positions are held by people not worthy of respect. If you happen to be the leader or an instructor, make sure that you earn the trust of your comrades before anything else.

Step 4: Training

The type of your militia will decide the kind of training provided at the place, it may range from first aid skill to weapon management and so on. The Internet is a great way to obtain the latest information on a variety of subject if needed though some filtering might be needed in certain cases. Military field manual is also an excellent source as well since it can provide with quality experiences and well-tested methods. Nonetheless, you probably have to invest a good amount of time and effort to figure out a suitable program for all members. Safety is number one priority, make sure everybody in the group got proper equipment and gear at each training session.

Step 5: Activity

Now you have an operational militia with plenty of trained personnel, it’s the time to conduct some activities. In the case that your militia is a civil defense group, there is little thing to be done unless your country is currently at war.  However, simple patrols or field exercises are a couple of activities to check the ability of the militia members.  You have to plan them out in advance along with a contingency solution people know what to do when things went south. After the conclusion of the activities, thoroughly review the performance of every member of the militia including yourself, there is always room for further improvement.

Step 6: Important tips

Never break the law, you must keep that in mind, the last thing you want to experience is to become an eyesore to the government. In fact, cooperate with the local authority whenever possible to show your organization benefits to the community. Promptly remove destructive elements from the militia, especially when they consistently fail to obey the group schedules and regulations. Always keep the original goal in sight and don’t lose it, letting trivial stuff to take over shall put an end to the militia in no time.


And that is all you should know about how to start a militia, not too hard to understand, right? Everything could appear to be hard at first but keep trying and you shall reach your goal before you know it. Take one step at a time and most important of all, try to have fun in the process.

Gerber Paraframe 1 vs 2 | Detail Comparison & Review

Instead of carry a handgun, you can bring a knife on your self-defense tool list. Although there are many knives available out there on the market, Gerber Paraframe is one of the most popular knives with fixed blades included. Gerber Paraframe has two models – the first and the second version. Each model has the similar and different features that we need to find out. Keep on reading to get your own answers.

Review of Gerber Paraframe 1

Gerber Paraframe 1 has a three in one clip point blade designed of high-quality stainless steel. In fact, the entire blade of this knife is made of the stainless steel. In general, the edge blade and jagged edge are well-made, but you should check the state before purchasing and using it.

Some specifications

  • Knife Blade Type: Partially Serrated
  • Locking Blade: Inbuilt
  • Number of Blades: 1
  • Max Blade Length (in.): 3 inches
  • Closed Length: 1 inches
  • Closed Length: 1 inches
  • One-Handed Opening: Inbuilt
  • Handle Material: Stainless steel
  • Blade Construction: Stainless steel
  • Weight: 7 ounces

Firm construction

With the blade, it is made from 400 Series stainless steel so that there is no doubt about the sharpness of the knife blade. The handle is created from 314-grade stainless steel. However, the handle is still lightweight enough for all users to carry and control the whole knife easily.

Generally speaking, this knife has a solid construction to withstand any obstacle and the weather condition.

Solid locking mechanism

The Frame Lock is a special unique locking system in Gerber Paraframe 1. Please recognize that it is not a Liner Lock feature that you may see in other products.

On the one hand, this version has other features such as the dual thumb lumps for ease of setup with one hand and a pocket clip. The pocket clip cannot interchange but it is still sturdy so that the entire knife is also very firm.

The blade slightly moves when pulled sideways, back and forth in the open and close movement. In other words, the Frame Lock keeps the lock in the open position carefully.

Sharp blade

You might be surprised at the sharpness of the blade. Catch the blade and do that what it is called a wiggle test.

Size and weight of the blade

The blade size is 3 inch which is an ideal for working, but it still small enough to carry wherever you want to.

Even if the knife does not include a sheath, you could keep it in your pocket or small space without any problem at all.

With the weight, you might be surprised that it weighs only 2.7 ounces, so there is no doubt that users cannot take it when necessary.

What we like

  • Ease of setup, use, and carry
  • Reasonable price point for most of the users
  • Lightweight blade
  • Well-made structure
  • Sturdy construction
  • High-quality locking mechanism
  • High-end model

What we do not like

  • Difficulty sharpen the steel (in the blade)
  • Hard to keep an edge (in the blade)
  • Lack of corrosion-resistant coated
  • Suitable for light usage only
  • Not safe in the lock frame

Review of Gerber Paraframe 2

Gerber Paraframe 2 is the largest of the eight knives in the Paraframe series, it is designed on the same minimal frame-lock model. It is a great simple open-frame knife with a serrated locking mechanism.

Some specifications

  • Blade Length: 50 inches
  • Blade Material: 7Cr17MoV
  • Blade Style: Tanto
  • Edge Type: Serrated
  • Handle Length: 625 inches
  • Handle Material: stainless steel
  • Frame and Liner: stainless steel
  • Weight: 30 oz.
  • User: right hand
  • Pocket Clip: tip-down
  • Knife Type: manual
  • Opener: thumb stud
  • Lock Type: frame lock

Sturdy frame

With the blade and the handle position, they are also made of the stainless steel. Moreover, the liner and the frame also are incorporated into the steel. In other words, stainless steel is the best materials for a folding knife like the Gerber Paraframe 2 to build a sturdy frame.

Secure locking mechanism

Like the first version, Gerber Paraframe 2 has the Frame Lock which is a sturdy locking mechanism for a pocket knife. This knife has a tip-down pocket clip and a thumb stud for ease of setup and holding while using.

Sharp blade

The blade is quite sharp to trim and cut your targets easily and smoothly. Undertake a wiggle test is easier by reaching the blade and begin your needs.

Size and weight of the blade

When looking at size and weight of the blade, you will know the reason why this version is lightweight and long enough on hand. The blade length is only 3.50 inches, and it weighs about 4 oz. to be suited a decent pocket knife.

What we like

  • Tremendous knife
  • Ease of use and sharpen
  • Lightweight
  • Affordable price tag
  • Can be easy for cleaning
  • Thick blade spin

What we do not like

  • Large handle for big hands only
  • Small thumb stud to control
  • Hard open in the first time

The difference between Gerber Paraframe 1 vs 2

Although you may not see the difference between Gerber Paraframe 1 and 2, they still have some small points to feel.

When holding both of them in your hands, you are able to feel the second version is longer and larger than the first one. Because Paraframe 2 has a larger handle than the first model.

On the one hand, version II is heavier with 4.3 ounces than 2.7 ounces in the first Paraframe. Even if it is heavier, it is still not a bulky knife to carry.

The thumb position is quite different. The first has the dual thumb lumps while the second has the thumb stud. Both of these features also help users take the knife easily.

Additionally, the blade type of the first version is Partially Serrated while the second model is Tanto.


Gerber Paraframe brand displayed a simple, reliable, and easily carried knives for everyone. Whether you choose the first version or the second, you will have a true investment for purchasing a self-defense tool for outdoor activities or just normal days. Why do not you buy a tactical knife like these products right now?

Spyderco Sharpmaker vs. Lansky: Which one is the better sharpener kit for your knife?

To many knife owners, the blade sharpness is among the most important features of the knife. Everyone wants their knife to stay razor sharp for as long as possible but eventually, a sharpening will be needed. So what kind of sharpener kit you should get for your knife? There are tons of models available on the market and each of them is unique on its own. Well in the case that you are confused and don’t know what to get, this article can be useful. The characteristic of two excellent sharpener kits and a comparison between them may help to make up your mind: Spyderco Sharpmaker vs. Lansky

A frequently used knife will slowly become dull no matter what kind of material the blade employs. Even the highest quality steel can show signs of wear and tear after a certain amount of time. The edge sharpness becomes lower and lower which considerably reduce the knife effectiveness. Due to repeated uses, the edge ends up misaligned and jagged that make smooth, cleaned cutting become harder to perform. This is when a suitable knife sharpener kit can truly show its worth. A correct choice of the product could return the blade sharpness in no time.

General information

Spyderco is a respected and well-known brand when it comes to knifes and they also got great knife sharpeners. In fact, they have produced sharpener kits for several years before finally introducing their first knife. Nowadays, the Spyderco Sharpmaker is one of the most popular tools for knife sharpening. It’s light, compact and easy to use even for people with little knowledge about knifes. While the Sharpmaker is no longer a new product, its usefulness allows the sharpener to remain in circulation until today, far from its original birth.

With a humble weight and limited dimensions, the Lansky is another great knife sharpener to have. Its simplicity and versatility mean the kit can handle a variety of knife blade at the appropriate angles. The inner storage spaces for the rods permit easy and secure carry wherever you go.  You can conveniently fir the whole thing inside your pockets or drawers. When a sharpening is needed, just take out the rods and deploy them on the case hoses. The case acts as the rods container and a stable surface for you to start grinding the knife blade.


Spyderco Sharpmaker kit consists of several items to match a wide range of sharpening needs. It got four ceramic rods for sharpening (Two coarse and two fine), two brass rods and a two-part plastic case that also act the base of the rods. Everything is very durable and design with high efficiency in mind. When you have no need for it, the Sharpmaker components can be combined into a single unit. You can quickly and effortlessly tuck that away and take it out again when a need arises. It’s small so the requirement for space is not really a big deal.

Using a turn box construction, the Lansky sharpener kit case contains the rods within itself. The case end and the rest are held together with a screw which allows you to turn the cap. This will reveal the hidden rods inside the internal compartments. There are four rods in total: Two brown ceramic rods (Medium Grit) and two white ones (Fine Grit). Right on the case surface is the sets of holes for you to stick in the rods. The entire thing is a simple yet effective design with a slim profile. It’s even smaller than the Sharpmaker so the Lansky is a portable sharpener kit.


In order to use the Sharpmaker, all you need is a stable and level surface then you can start deploying it. When you unpack the case, you will a number of holes for you to insert the rods. There are two angle settings you can use in here, the 40 degrees and the 30 degrees. The former is best used for the average sharpening while the latter is when you want to stiffen the edge a bit. When you decide on the angle to use, put the rod into the hole and grind the knife blade up and down the rod. Continue till you can achieve the wanted result on the edge.

When you need to use the Lansky, also select a suitable surface to work on so you don’t slip your hand by mistake. Turn open the end cap and take out the rods from the internal compartments. As mention before, there are holes on the case surface with different angles for the rods insertion. Pick the angle you want, set in the rods and start grinding the edge. Run the knife edge through the rod and repeat the process. Begin with about 10 – 15 passes for each of the edge sides on the brown rod and move on to the white rods.

Both the Sharpmaker and the Lansky use ceramic rods as a component in the kit. Once in a while, you will need to cleanse them so as to remove metal particle accumulation from all the grindings. Ajax or similar cleaning solutions will work wonderfully here. Of course, you can rotate the rod side in each use to increase the time between cleanings. And do remember that ceramic is a good material but not really the strongest. Handle them with care since if you accidentally drop them onto the floor, they may shatter.


As a sharpener, the Sharpmaker and the Lansky are high-quality products that function very well at their intended purpose. But if you got large size knifes and require dedicated sharpening, the Sharpmaker will be the better choice. It’s a good kit that can handle virtually all of your sharpening needs. From enthusiast to amateur, the Sharpmarker can answer to any demands. However, it’s much more expensive than the Lansky. So if you are on a budget and only need the average sharpening, the Lansky will surely not disappoint you.


And that should be all of the main points, not too hard to understand, right? Any knife owner must have something to keep their knife sharpness and that is why a sharpener kit is important. With a detailed comparison between Spyderco Sharpmaker vs. Lansky, you may have a general idea of what is a good product to buy. But if you see that one of the two products above fit all of your preferences, don’t wait anymore and just get them.

Important issues when it comes to living in an RV on your own land

Living in an RV is a really nice if you prefer a life of traveling whenever you want. However, if you just decide to everything on a whim, it may be troublesome. There is a variety of thing you need to consider and research if you intend to make use of an RV. From operation costs to local regulations, you need to take into account all of them before you can finally decide. So if you are entirely new to this and don’t know what to do, this article will be helpful to you. You can obtain several interesting knowledge regarding living in an RV on your own land and beyond right here.

There is a wide range of thing to learn about an RV in order to use it effectively and conveniently. It’s wise that you have a firm grasp on any essential issues that can impact your experience with RV. Instead of rushing ahead to buy such a vehicle only to meet a heap of problems, take it slow and steady. Check out every single aspect of your situation and the neighborhood environment. Down below are some questions that you may encounter while operating the RV and their appropriate solutions.

Is it legal to live in a camper in your backyard?

Your backyard belongs to you so can use and do whatever you want with it right? Sadly, the answer depends largely on the law of your place. Many residential zones and city regulations forbid the use of a camper as a permanent housing unit.  If you intend to spend times on the RV, ensure that the local zoning ordinances allow you to do so. Otherwise, it’s illegal to live in any type of camper in your backyard. In certain states, the use of an RV in your backyard isn’t a violation of the law but a permit will be needed which only valid for a limited amount of time.


Even if you can actually manage to get the necessary paperwork done, there are still plenty of things to address. The authority may let you park the camper in your backyard but it can be easily evicted if there are complaints. This means your camper must not disturb the neighbor in anyways. Noise, smell, possible fire and health hazards are some examples of what can get you permit revoke. That is why it’s vital not to relax when you finally push through with the application process. Maintain the camper to best of your ability and try not to get the ire of the people around you.

Can I live in an RV on my own property?

Same as above, the point is to get the go-ahead of the authority before you attempt to do anything. Nowadays, many states disallow the use of full-time RV and alike within the city limit. Even parking them near your house is not tolerated. So if you want to enjoy living in an RV on your property, buy a lot that is far from town.  It may take a lot of time and effort but it’s your best shot. Such remote locations may have a rather affordable price for your pocket too. Of course, choosing to live on a land that is far away from civilization also has its drawbacks

If you intend to live in an RV, you need to have accesses to the basic necessities such as water, electricity and food. Since you are in the middle of nowhere, installing the RV with them may be a difficult task. Whenever you need something, you probably have to drive a long distance to get to the nearest shop which is obviously inconvenient. Your safety is another considerable problem. When unforeseen problems arise, it could take a long time before any form of assistance can reach you.

Living in a travel trailer on private property

Once again, the zoning regulation has the final say regarding this subject. If that private property belongs to you then there is no need to discuss any further. However, if the land belongs to someone else then you need to also produce a consent before you can actually back your travel trailer into it.

How to live in an RV on your own land?

Unless you want to live as one with nature, the first thing to do is secure the RV utilities and make sure that they are functional.  Depend on the proximity to the energy and water sources, you may have to consider an assortment of options.  Portable generator and water tank could work if you have no access to permanent installations. But if you can hook the RV to the house power grid and piping systems then it would be even better. This is a common choice if you have to live in the RV while waiting for the house to be renovated.

Next, you need to figure out a way to safely dispose of your wastes. As mentioned before, the health issue is one of the reasons which can make the authority to order a removal of your camper. So ensure that your RV disposal system works well and doesn’t have any leakage. The RV should have its own hose to remove the wastes so just take it out and insert the hose into a dump container. Hit the button and the RV will pump out everything in its waste tank. After that, transport the container to a dumping station or alike for proper disposal.

Of course, you can always move the RV to the dumping station and pump out the waste directly if you wish.


And that should cover all the usual questions involving living in an RV on your own land, fairly easy to understand, right? Depend on the circumstances or just your preferences alone, an RV may seem to an ideal way to pass your time. But before you can move into it, there are many things that require your consideration. Some of the more pressing matters have been laid out above for you to check. Take a look at them before you make the final decision.

Manix 2 vs paramilitary 2 – Which one should be your partner?

Originated from the Spyderco, Manix 2 vs paramilitary 2 keep showing outstanding features making knife seekers confused. For many users out there, the former may be better while others always appreciate the latter.

Manix 2 features

Patented USA quality along with Ball Bearing Lock™ are two points which you should pay attention to first for the Manix 2. Such design comes from the brand’s aim to make the lock robust but still easy to close and open. Besides, thanks to a hardened ball, it will be not challenging to rotate for traveling itself at all.

Another attraction of the Manix 2 lies in its blade. A combination of stainless CPM® S30V® steel, and high flat grind contributes perfectly to balance for both strength and shape. With the purpose of bettering a secure as well as avoiding an annoying grip, there are areas which match the jimping and choil.

Technically, to apply the mechanism of the Ball Bearing Lock™, the knife in general needs a support of the broad steel blade combined with a G-10 back scale. The tighter they are, the better the lock can work.

For more detailed about the G-10 spacer, it is a cage of polymer wrapping the ball. To make the knife open smoothly, a plunger plays a part in driving the ball forward the ramp. On the other hand, you just need to release the lock by pulling it back to let the knife steel line pivot. By the Ball Bearing Lock™, it does not require you to place your fingers near the edge of both opening and closing movement.

Additionally, there is an hourglass clip which is reversibly available on the Manix 2. Its role is to support not only the right carry but also the left one. Hence, the Trademark Round Hole and the particular ball lock mechanism can work well and optimize their function. Here is also an advantage for users who are ambidextrous on the way of searching for the best Spyderco knife.

Paramilitary 2 features

For the Paramilitary 2, it is not about the USA standard certification. It is also not about the Ball Bearing Lock™. The main identifications for such product are the principle of Constant Quality Improvement and a Compression Lock.

Unlike the kind of lock mentioned above, this shows a steel part which the Spyderco designers wedged between the tang and the pin for stopping. However, in term of working way, there is a similarity for both the Compression and the Ball Bearing Lock.

Most of the appreciation for the lock of the second knife focus on its strength, opening flexibility and favor for ambidextrous. But, it is impossible to avoid drawbacks such as the shortage of positive closing pressure and difficulty to disengage.

As an improvement from the last version, the Paramilitary 2 features a narrower G-10 handle. Therefore, inconvenient angles found when closing will not occur anymore because of the thinner edge of the handle along with the blade.

Once again, the CPM S330V is in use for the Spyderco to create the Paramilitary 2 with a nice flat blade. Along with the ground, the knife’s tip is also longer than other products from the brand. Then, they make sure that an extra jimping surface is included to the choil not only the spine but also the finger ones.

Manufacturers believe that the steel named CPM S330V is one of the best material for producing the knife blade. Its formation makes the edge sharper and tighter than ever. Exactly, in this steel, the existence of vanadium carbides is much more efficient than the distribution of chromium one.

The remarkable features regarding this knife do not stop here. One more thing so-called Bushing Pivot System has generated flexible actions as well as tolerances. And more options of carrying will be for you by a more significant lanyard.

A quick comparison for manix 2 vs paramilitary 2

The information above is brief knowledge about two knives from the same brand – Spyderco. Now, it is time to look back and wrap up for the best choice. For the blade material, both Manix 2 and Paramilitary 2 are from the CPM S330V. So, an assurance for the stainless and durable aspects is undoubted.

Moreover, due to applying the G-10 handle, two knives become more rigid and do not trouble when carrying. Regardless of the faults like the heavy weight, such handle kind still is outstanding with features including heat and abrasion resistance.

For the Ball Bearing and Compression Lock style, the first one seems to deserve to be a winner even if the other is also quite ok. Users find the Compression Lock’s weakness in its working.

As the opening, the lock will let you see a metal tab lying between the blade tang and the pin. It is the reason why the more you try to close the Paramilitary 2, the tighter the lock will be. If this case occurs many times, the lock will break, and the stop will tear.

Besides the negative point, in general, the Compression Lock is always greater than many other locks out there for the holding knives. But in the competition with the Ball Bearing Lock, unfortunately, it seems to get a lower stage. The Spyderco ultimately gives the Manix 2 a bonus point among the mass of folding knives.

On the other hand, according to technical measures, the Paramilitary 2 surely advantages over the competitor thanks to not only a thicker blade and the lightweight as well. Nevertheless, the numbers between these knives are not much different.

In closing, despite not belonging to a list of the best EDC knife under $50, the Manix 2 and Paramilitary 2 still deserve for the first choices of folding knives. Basing on features and comparison, it is highly recommended for you to pick the Manix 2.

Do not mention more to the same points of two like materials for the blade and the spacers. For the price, the Paramilitary 2 is nearly 1.5 times more expensive than the Manix 2 while the second product bears more attractive features, for example, the locking style. Therefore, in hesitation for the Manix 2 vs paramilitary 2, you should pick the former as your long-term partner.